Execute XM1

per page

List  Grid 

Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Xpress Aluminium Wheel Hub Hex Offset 4.25mm For XQ1 Xray T4 #XP-20016

    Xpress Aluminium Wheel Hub Hex Offset 4.25mm For XQ1 Xray T4 #XP-20016

    Narrow wheel hexes for easy trackwidth setup change! Fits modern touring cars which use the hex and locknut wheel mounting system. Laser engraving for you to easily see what width optional wheel hex it is.

    Learn More
    Model: XP-20016
  2. Execute XM1 Vertical Topdeck Set #XP-10370

    Execute XM1 Vertical Topdeck Set #XP-10370

    Achieve large amounts of forward traction whilst retaining cornering grip with this vertical top deck set! Adjust the lateral grip generated by your chassis by either adding or removing the center stiffener posts. The last part give you the option by linking the topdeck to the motor mount stiffener post as well!

    Learn More
    Model: XP-10370
  3. Xpress Bando Kevlar Drive Belt Front 3 x 432 mm For Execute XM1 XM1S #XP-10350

    Xpress Bando Kevlar Drive Belt Front 3 x 432 mm For Execute XM1 XM1S #XP-10350

    Bando branded belts for the Execute XM1 series, made for longer lifespan but sacrificing some durability at the same time for use when using high powered motors!

    Learn More
    Model: XP-10350
  4. Xpress Bando Kevlar Drive Belt Rear 3 x 171 mm For Execute XM1 XM1S #XP-10351

    Xpress Bando Kevlar Drive Belt Rear 3 x 171 mm For Execute XM1 XM1S #XP-10351

    Bando branded belts for the Execute XM1 series, made for longer lifespan but sacrificing some durability at the same time for use when using high powered motors!

    Learn More
    Model: XP-10351
  5. Xpress Graphite 2.25mm High Flex Bottom Chassis Plate For XM1 XM1S #XP-10354

    Xpress Graphite 2.25mm High Flex Bottom Chassis Plate For XM1 XM1S #XP-10354

    Introduce more flex to your XM1 chassis by using this high flex top deck! By using a different cut rather than thinner materials, durability is not sacrificed!

    Learn More
    Model: XP-10354
  6. Xpress Graphite 2mm High Flex Upper Deck For XM1 XM1S #XP-10355

    Xpress Graphite 2mm High Flex Upper Deck For XM1 XM1S #XP-10355

    Introduce more flex to your XM1 chassis by using this high flex top deck! By using a different cut rather than thinner materials, durability is not sacrificed!

    Learn More
    Model: XP-10355
  7. Xpress Aluminum 2mm Bottom Chassis Plate For Execute XM1 XM1S #XP-10379

    Xpress Aluminum 2mm Bottom Chassis Plate For Execute XM1 XM1S #XP-10379

    Aluminum bottom chassis for Execute XQ1, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity!

    Learn More
    Model: XP-10379
  8. Execute XM1 Front Camberlink Mount 2pcs #XP-10368

    Execute XM1 Front Camberlink Mount 2pcs #XP-10368

    Execute XM1 genuine official replacement part from Xpress.

    Learn More
    Model: XP-10368
  9. Xpress Double Joint Universal Shaft 2pcs For Execute XM1 XM1S #XP-10375

    Xpress Double Joint Universal Shaft 2pcs For Execute XM1 XM1S #XP-10375

    Replacement Double Joint Universal Shafts for Execute XM1, or a direct fit upgrade for the XM1S (5x10x4mm bearings unchanged). Double jointed universals reduce the angle which the shafts are at so reduces the vibrations generated and thus give a better steering response!

    Learn More
    Model: XP-10375
  10. Execute XM1 3x18mm Flat Spot Suspension Pivot Pin #XP-10377

    Execute XM1 3x18mm Flat Spot Suspension Pivot Pin #XP-10377

    Flat pin suspension pivot pin, for use in both the front C hub and rear hub. The flat spot allows for more surface area for the set screw to secure the pin in place and prevent it from flying out.

    Learn More
    Model: XP-10377
per page

List  Grid 

Set Descending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5