After taking a look at Felix's FT1S, today we look under the lid of Felix's Execute XQ10 which he also piloted to the top step of the podium at the 2nd round of the FSEARA race in the modified class!

Here we can see the front of Felix's ride, nothing particularly special besides the spring steel double jointed universals.

A side view of the front end, here we can see Felix chose to use the Aluminum Adjustable Battery Stoppers! Probably for racing, tape still gives the most ease of mind.

A top view of the chassis and we can see Felix chose to use the Flex Eliminator Top Deck, with the Composite Upper Deck Stiffener to reduce the flex in the front.

One more hard to catch detail was that Felix is currently using the Titanium Outdrive Adaptors which allow the use of blades and keeps rotating mass weight low.

From the Chassis, we can see the interesting setup of using a set screw at the bottom of the post and also a screw from the top of the rear t plate to limit flex but not too much.                           


His setup can be viewed here.