Replacement & Upgrade Parts for Xpress Execute XQ1.
Our Execute XQ1 will be the car of our choice to execute our racing passion. A modern take on the traditonal touring cars with some unique Xpress elements!
Model: XP-10052
Description:
This is Xpress Rear Drive Belt 189t #XP-10052, genuine official replacement part from Xpress...
Model: XP-10132
Description:
This is Xpress Kevlar Front Drive Belt, genuine official replacement part from Xpress...
Model: XP-10645
Bando branded belts for the Execute XQ1 XQ1S XQ2S series, made for longer lifespan but sacrificing some durability at the same time for use when using high powered motors!..
Model: XP-10647
Description: Low friction kevlar belts for most of the "mid" pulley touring cars on the market. Kevlar being strong and soft proves to be the best material for making belts!Note: This item is not compatible with the original XQ1 / XQ1S / XQ2S chassis, it should be use together with the #XP-10625 or ..
Model: XP-10646
Description:
Bando branded belts for the Execute XQ1 XQ1S XQ2S, made for longer lifespan but sacrificing some durability at the same time for use when using high powered motors!..
Model: XP-10401
Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S DR1S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs!
Note: To use this new collar with other touring chassis in the Execute series, including XQ10, XQ10F, XQ1, XQ1S, FT1, and FT1S, you n..
Model: XP-10247
Harder suspension parts for use in medium to high grip conditions! This also allows for more efficient suspension with more grip generated as the arm flexes less when compared to the original plastics!..
Model: XP-10320
Description:
On high grip conditions, change to this steering plate which offers less ackermann which in turn provides more stability in the middle of the corner! Comes in a pack of four of two sets, marked with holes. The set with two holes give the least amount of ackermann, use this set to fine t..
Model: XP-10724
Replacement plastic shock parts for the V2 long travel short shock set #XP-10593, this is a direct upgrade for the stock shocks from the XQ2S.
It can still fit with original kit short shock from XQ10 and FM1S, but the shock length will be decrease by 1mm, so it is recommended to use Long Travel Alum..
Model: XP-10863
Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis.
Note: The bumper parts in this item do not fit the FT1 / FT1S...
Model: XP-10562
Description:
The slim designed new foam bumper from the XQ10, this allows you to shift the weight towards another area for more steering! With the new style of high front downforce bodies, this bumper fits nicely with them. The three extruding tabs can be cut down if you choose to mount your body cl..
Model: XP-10726
Description:Further fine tune your roll centers with these easy to install spacer shims for your lower suspension mounts! Also included a shim for the one-piece optional FR mount!..
Model: XP-10169
Description:
This is Xpress Medium Spring Pair Silver for Execute XQ1 XQ10 XQ10F XM1 FT1 XQ2S DR1S. Genuine official replacement part from Xpress...
Model: XP-10549
Description:
Replacement part for the XQ10 Touring chassis or Mid Motor Conversion kit for Execute XQ1! Rear stiffener allowing for different stiffness to be dialed into your chassis!..
Model: XP-10267
Description:
This is Execute replacement On-power Control System 0 Deg Aluminium C-hub, genuine official replacement part from Xpress...
Model: XP-10268
Description:
This is Execute replacement On-power Control System Graphite Knuckle Plate, genuine official replacement part from Xpress...
Model: XP-10269
Description:
This is Execute replacement On-power Control System System Ball Stud Set, genuine official replacement part from Xpress...
Model: XP-10685
Description:
This is the replacement part for the suspension arm from the On-power Control System V2 #XP-10641. On-power Control System changes how your car behaves in the middle of the corner, adjust the angle with spacers to differ the toe-in change during suspension compression.
Replacement Alumi..
Model: XP-10641
Description:
Change how your car behaves in the middle of the corner with the Xpress on-power Control System (XOC), adjust the angle with spacers to differ the toe-in change during suspension compression. Comes with special cut arms so you can adjust the wheelbase to be the same as if no XOC was use..
Model: XP-10131
Description:This is Xpress Rear Camberlink Mount Pair, for Execute XQ1 XQ10 XQ10F, genuine official replacement part from Xpress...
Model: XP-10191
Description:
Adjust your chassis stiffness by changing to this optional one piece suspension mount for the front of the rear end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected!
Note: When install on XQ1S, XQ2S, FT1S, XM..
Model: XP-40054
Description:Genuine replacement part for Xpress series of cars...
Model: XP-40056
Description:
Genuine replacement part for Xpress series of cars...
Model: XP-10160
This is Xpress Shock O-Ring set, genuine official replacement part from Xpress...
Model: XP-10601
Description:
Redesigned X-Rings for smoother operation, with a revamped material choice which operates better in hot weather and last longer!..
Model: XP-10183
Description:This is Xpress genuine official replacement part for for Execute, Xpresso, GripXero Series..
Model: XP-10184
Description:This is Silicone Gear Differential O-RING 5x2mm 10pcs for Execute, Xpresso, GripXero Series, Xpress genuine official replacement parts...
Model: XP-10600
Softer, less contact path allows these X Rings to not generate as much drag on your diff cups when compared to traditional o-rings!..
Model: XP-10168
Description:
This is Xpress Soft Spring Pair for Execute XQ1 XQ10 XQ10F XM1 FT1 XQ2S. Genuine official replacement part from Xpress...
Model: XP-10053
Description:This is Xpress Replacement Spur Gear 64P 116T, genuine official replacement part from Xpress...
Model: XP-40071
Replacement Flat spot pins for the universals found on Execute.
Note: Please check your universal before you decide to purchase this item. This only fits with universals those with a 3x2mm set screw in the head of the universals at the differential / spool side...
Model: XP-10166
This is Steel Double Joint Universal Shaft Pair for Execute Series Touring Chassis, genuine official replacement part from Xpress. With double joint universal shaft will greatly minimize the vibration of the outside front wheel in corners and improves the cornering speed and stability.
Note: When u..
Model: XP-40069
Description:Genuine replacement part for Execute, Xpresso, GripXero Series of cars...
Model: XP-10556
Description:
Replacement part for the Execute XQ10, also a direct upgrade parts for XQ1S XQ2S DR1S and XM1S
Note: Need to use with Composite Spool 38T Set (XP-10264) if install on XQ1 XM1 FT1 FT1S FM1S XQ10F..
Model: XP-10126
Xpress Steel Spool Outdrive Cup Adaptor 2Pcs For XQ1 XQ1S XM1 XM1S D1 #XP-10126
Description:
This is Xpress Execute XQ1 Steel Spool Outdrive Adapter Pair, genuine official replacement part from Xpress...
Model: XP-10157
Description:
This is Xpress Steel Steering Turnbuckle Set for Execute series touring chassis, genuine official replacement part from Xpress...
Model: XP-10156
This is Xpress Execute Steel Turnbuckle 29mm Set, genuine official replacement part from Xpress...
Model: XP-10170
Description:
This is Xpress Stiff Spring Pair Pink for Execute XQ1 XQ10 XQ10F XM1 FT1 XQ2S DR1S. Genuine official replacement part from Xpress...
Model: XP-10604
Description:
New and improved suspension arms. These will be direct upgrade also on the Execute XQ1 series, during testing it was found that these suspension pieces gave more corner speed!
This C-hub also suitable for XQ2S, but will not compatible with the Body Support Brace #XP-10819. To use the B..
Model: XP-10605
Description:
New and improved suspension arms. These will be direct upgrade also on the Execute Touring series, during testing it was found that these suspension pieces gave more corner speed!**Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspen..
Model: XP-10400
Description:Updated C Hubs found on the Execute XQ2S, DR1S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the XP-10401 C Hub King Pin Set!..
Model: XP-10361
Description:
Replacement velcro strap for the Tweak Free Battery mount for Xpress's Execute Series! This Strap is used when the Tweak Free Battery Mount (#XP-10287) is installed in the Execute XQ1 or XQ1S!..
Model: XP-10566
Description:
Direct upgrade part for Xpress Composite Upper Deck Stiffener from plastic composite to aluminum, further increase the stiffness of the upper deck, can be use as setting option for high grip tracks.Also a replacement part for the Mid Pulley Conversion kit for Execute XQ1 XQ1S #XP-10652...
Model: XP-10165
Description:
This is Upright Pin Screw 2X3mm For Execute XQ1 XQ1S, genuine official replacement part from Xpress...
Model: XP-10321
Description:Achieve large amounts of forward traction whilst retaining cornering grip with this vertical top deck set! Adjust the lateral grip generated by your chassis by either adding or removing the center stiffener posts. The last part give you the option by linking the topdeck to the motor moun..
Model: XP-10264
Description:Genuine official replacement part from Xpress for XQ1S / XQ2S / XM1S. It also fits XQ1, XQ10, XQ10F, XM1, FT1, FT1S, FM1S...