Model: XP-10062
Xpress Xpresso K1 M1 1.0mm Front Anti-Roll Bar Set #XP-10062
Description:
Add anti-roll bars to either your Xpresso K1 or M1 with this rollbar set, included is all required hardware requried to install a rollbar to your car in this package. The longer 1.0mm rollbar is for the M1 and the shorter one ..
Model: XP-10064
Xpress Xpresso K1 M1 1.0mm Rear Anti-Roll Bar Set #XP-10064
Description:
Add anti-roll bars to either your Xpresso K1 or M1 with this rollbar set, included is all required hardware requried to install a rollbar to your car in this package. The longer 1.0mm rollbar is for the M1 and the shorter one i..
Model: XP-40019
Description:
Replacement driver tips for Xpress's Aluminum 7075 lightweight drivers! Special treated steel tips which promotes high accuracy and long lifetime due to low wear! Stripes on the tooltip allows you to easily spot the size of the tip as well as the laser engraved size markings!..
Model: XP-10129
Description:This is Xpress Aluminium 5mm Wheel Hub Red Pair, fits all shafts with 5mm axle. Genuine official replacement part from Xpress...
Model: XP-10640
Description:
Aluminum bottom chassis for both Execute FT1, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity!
Note: When use with Execute FT1S, need to install the Separated Bulkhead Typ..
Model: XP-10653
Description:
Aluminum bottom chassis for Execute XQ10, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity!..
Model: XP-40123
Description:
Replacement driver tips for Xpress's Aluminum 7075 lightweight drivers! Special treated steel tips which promotes high accuracy and long lifetime due to low wear! Stripes on the tooltip allows you to easily spot the size of the tip as well as the laser engraved size markings!..
Model: XP-10017
Xpress 2.0mm Graphite Chassis For K1 #XP-10017
Description:This is Xpress Xpresso K1 2.0mm Graphite Chassis, genuine official replacement part from Xpress...
Model: XP-10619
Description:
High clearance Top Deck for use with our Mid Motor Conversion Kit #XP-10495, more space for big pinions through the extended cut out point! Will be handy with 21.5t blinky classes such as VTA or GT!..
Model: XP-10552
Description:
Replacement upper deck for the Execute XQ10, stiffness can be tuned with the aluminum inserts!..
Model: XP-10639
Description: Designed to be used with the Flex Elimuinator Bearing and Collar set #XP-10683, this set will allow you to limit longitudinal chassis flex whilst retaining lateral chassis flex. What this allows is corner grip but increasing forward traction!..
Model: XP-10092
Xpress 2.0mm Graphite Upper Deck Pair For Xpresso M1 #XP-10092
Description:
This is Xpress 2.0mm Graphite Upper Deck Pair For Xpresso M1, genuine official replacement part from Xpress...
Model: XP-40020
Description:
Replacement driver tips for Xpress's Aluminum 7075 lightweight drivers! Special treated steel tips which promotes high accuracy and long lifetime due to low wear! Stripes on the tooltip allows you to easily spot the size of the tip as well as the laser engraved size markings!..
Model: XP-10485
Description:
Spare chassis plate for Xpress Execute XM1 with the 239mm converison kit!..
Model: XP-10713
Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short!..
Model: XP-10490
Description:
Replacement part for the Mid Motor Conversion kit for Execute XQ1...
Model: XP-10866
Description:
Optional Graphite Chassis plate for the Execute XQ2S, XQ1S and XQ1 giving you better performance at high temperature tracks and provides more consistent handling when compared to the stock chassis...
Model: XP-10551
Description:
Replacement chassis plate for Xpress Execute XQ10, made from high quality high weave carbon which retains it's elasticity for a long time giving you a consistent handling car...
Model: XP-40124
Description:
Replacement driver tips for Xpress's Aluminum 7075 lightweight drivers! Special treated steel tips which promotes high accuracy and long lifetime due to low wear! Stripes on the tooltip allows you to easily spot the size of the tip as well as the laser engraved size markings!..
Model: XP-10909
Description:
Original replacement part for the Dragnalo DR1S, motor mount plate for mounting 1/8 sized motors...
Model: XP-10910
Description:
Original replacement part for the Dragnalo DR1S, FRP motor mount plate for 1/10 540 motors...
Model: XP-10907
Description:
Original replacement part for the Dragnalo DR1S...
Model: XP-10954
Description:Graphite motor plate for more rigid motor installation whilst keeping weight at a minimum...
Model: XP-10955
Description:Graphite motor plate for more rigid motor installation whilst keeping weight at a minimum...
Model: XP-10951
Description:Graphite bottom deck providing better flex characteristics compared to original fibre piece, also offering better consistency in hot conditions...
Model: XP-40021
Description:
Replacement driver tips for Xpress's Aluminum 7075 lightweight drivers! Special treated steel tips which promotes high accuracy and long lifetime due to low wear! Stripes on the tooltip allows you to easily spot the size of the tip as well as the laser engraved size markings!..
Model: XP-40078
Description:M chassis body with only racing in mind, featuring aerodynamic elements taken from real racing cars to provide you with the ultimate racing body! Lightweight lexan combined with the low roof height to prevent any traction rolls and makes cornering much eaier and faster!..
Model: XP-10391
Description:
For use with the Xpress Execute XM1 on highspeed tracks or in situations where stability is required. By extending the wheelbase by 15mm, you gain more stability by having a car less willing to rotate in the corners and will give you a car that will be easier to drive...
Model: XP-10393
Description:
Spare chassis plate for Xpress Execute XM1 with the 225mm converison kit..
Model: XP-10394
Description:
Spare upper deck for Xpress Execute XM1 with the 225mm converison kit..
Model: XP-40236
Description:High grip rubber wheel set from Xpress for touring car competition use! Features a 12mm Hex mounting system and 0 offset, perfect for almost all touring chassis found on the market. This is a pre-glued wheelset, fit for controlled tire races with specially formulated rubber designed for ..
Model: XP-10867
Description:Aluminum bottom chassis for Execute XQ2S, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity! It also fits with XQ1 and XQ1S...
Model: XP-10908
Description:
Original replacement part for the Dragnalo DR1S...
Model: XP-10733
Description:Optional Graphite Top deck for the Execute FM1S, giving you better performance at high temperature tracks!This is also the out of box front top deck for XQ10F...
Model: XP-10732
Description:Optional Graphite Top deck for the Execute FM1S, giving you better performance at high temperature tracks!..
Model: XP-10714
Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short!..
Model: XP-10952
Description:Graphite top deck providing better flex characteristics compared to original fibre piece, also offering better consistency in hot conditions...
Model: XP-40125
Description:
Replacement driver tips for Xpress's Aluminum 7075 lightweight drivers! Special treated steel tips which promotes high accuracy and long lifetime due to low wear! Stripes on the tooltip allows you to easily spot the size of the tip as well as the laser engraved size markings!..
Model: XP-10343
Description:
Replacement part for the Mid Motor Conversion kit for Execute XQ1 and XQ10..
Model: XP-10720
Description:
Original replacement servo holder plate for use in conjunction with the XP-10690 mid pulley conversion kit...
Model: XP-10937
Description:
Replacement rear shock tower for the Dragnalo DR1S. Note: If used on the XQ2S, the shock angles will be different...
Model: XP-10137
Description:This is Execute XQ1 Graphite Floating Servo Holder, genuine official replacement part from Xpress...
Model: XP-10019
Xpress 3.0mm Graphite Front Shock Tower For Xpresso K1 M1 #XP-10019
Description:
This is Xpress 3.0mm Graphite Front Shock Tower, genuine official replacement part from Xpress...
Model: XP-10020
Xpress 3.0mm Graphite Rear Shock Tower For Xpresso K1 M1 #XP-10020
Description:
This is Xpress 3.0mm Graphite Rear Shock Tower, genuine official replacement part from Xpress...
Model: XP-40022
Description:
Replacement driver tips for Xpress's Aluminum 7075 lightweight drivers! Special treated steel tips which promotes high accuracy and long lifetime due to low wear! Stripes on the tooltip allows you to easily spot the size of the tip as well as the laser engraved size markings!..
Model: XP-10602
Description:New 3.0mm outer suspension pins, to be used with the new "Strong" series of redesigned suspension arms for the Execute series!**Note: If use this part on XQ1 or XQ1S, need to use with Composite Suspension Parts Set Hard Strong #XP-10565 or Strong Composite Suspension Parts Set #XP-10606..
Model: XP-10139
Description:This is 3.0mm Suspension Pivot Pin for Execute series, genuine official replacement part from Xpress...
Model: XP-40002
Description:
Cool your ESC in hot temperatures with this aluminum cased fan. With the aluminum case, allowing for it to act as a heatsink to help dissipate heat..
Model: XP-10334
Description:
Spring steel double jointed universals with a replaceable pin to exchange when worn out! Smoother cornering when compared to traditional single jointed universals!
Note: When using this part for upgrading the universal shaft from XQ1S, XQ2S, FT1S and DR1S, need to change the 5x10x4mm b..
Model: XP-10716
Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short!..
Model: XP-10289
Description:
Execute XM1 XM1S FM1S genuine official replacement part from Xpress...
Model: XP-10377
Description:
Flat pin suspension pivot pin, for use in both the front C hub and rear hub. The flat spot allows for more surface area for the set screw to secure the pin in place and prevent it from flying out...
Model: XP-10874
Description:Replacement parts for the Xpress Arrow AT1, genuine part for Xpress series of cars...
Model: XP-10378
Description:
Replacement damper piston for Xpress's K1 M1 XQ1S XM1S D1 FM1S, featuring four holes for a lighter dampening effect in your shocks!..
Model: XP-10151
Description:This is Xpress 4.8mm Ball 10mm Thread, 10pcs package, genuine official replacement part...
Model: XP-10239
Description:This is Xpress 4.8mm Ball 10mm Thread 4pcs, genuine official replacement parts for Xpress...
Model: XP-10987
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10148
Description:
This is Xpress 4.8mm Ball 5mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10236
Description:This is Xpress 4.8mm ball 5mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10149
Description:
This is Xpress 4.8mm Ball 6mm Thread, 10 pcs package, genuine official replacement part from Xpress...