Search Criteria
Products meeting the search criteria
Model: XP-10137
Description:This is Execute XQ1 Graphite Floating Servo Holder, genuine official replacement part from Xpress...
Model: XP-10602
Description:New 3.0mm outer suspension pins, to be used with the new "Strong" series of redesigned suspension arms for the Execute series!**Note: If use this part on XQ1 or XQ1S, need to use with Composite Suspension Parts Set Hard Strong #XP-10565 or Strong Composite Suspension Parts Set #XP-10606..
Model: XP-10334
Description:
Spring steel double jointed universals with a replaceable pin to exchange when worn out! Smoother cornering when compared to traditional single jointed universals!
Note: When using this part for upgrading the universal shaft from XQ1S, XQ2S, FT1S and DR1S, need to change the 5x10x4mm b..
Model: XP-11044
Description:Steel Double Joint Universal Shaft Pair for Execute Series Touring Chassis, genuine official replacement part from Xpress. With double joint universal shaft will greatly minimize the vibration of the outside front wheel in corners and improves the cornering speed and stability. These mea..
Model: XP-10151
Description:This is Xpress 4.8mm Ball 10mm Thread, 10pcs package, genuine official replacement part...
Model: XP-10239
Description:This is Xpress 4.8mm Ball 10mm Thread 4pcs, genuine official replacement parts for Xpress...
Model: XP-10148
Description:
This is Xpress 4.8mm Ball 5mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10236
Description:This is Xpress 4.8mm ball 5mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10149
Description:
This is Xpress 4.8mm Ball 6mm Thread, 10 pcs package, genuine official replacement part from Xpress...
Model: XP-10237
Description:This is Xpress 4.8mm Ball 6mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10150
Description:
This is Xpress 4.8mm Ball 8mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10253
Description:
This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10682
Description:This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10254
Description:
A redesigned ball end set for replacing all the 4.8mm ball ends on the Execute XQ1 / XQ1S. Also compatible with other Execute Series Chassis...
Model: XP-10948
Description:This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle...
Model: XP-10895
Description:This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle...
Model: XP-40086
Description:
Reduce the amount of free play you might get from bearing slop in your driveshafts with these shims. Applicable to the front or rear...
Model: XP-10981
Description:Lift your servo, receiver and fan off your chassis to not affect your chassis flex. Graphite piece which extends from underneath the servo for you to stick your electronics on. Use the 70mm plate on mid mount cars and 90mm on standard layout cars (XQ1, XQ2S)..
Model: XP-10811
Description:
Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..
Model: XP-10812
Description:
Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..
Model: XP-10123
Description:
This is Xpress Execute 2 Piece Suspension Mount Pair, genuine official replacement part from Xpress. These can be used either in the FR or RF position.Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S. DR1s and other sport series Execute Chassis replacing the original composite suspens..
Model: XP-10947
Description:Aluminum upgrade pulley for Xpress sport series of cars, upgrade on the durability at the cost of a heavier drivetrain...
Model: XP-10224
Description:
Gain more mid corner control with this 5mm Ackermann Steering plate! By changing the angle of ackermann, you will notice better control-ability of the car during mid corner and acceleration out of the corner!..
Model: XP-10192
Description:
Adjustable LiPo stoppers for easily securing LiPos of different lengths...
Model: XP-10935
Description:Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Also included are the new kingpin sets which are required for installing these C-Hubs..
Model: XP-10936
Description:Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are required for installing these C-Hubs..
Model: XP-10111
Description:
Genuine official replacement part from Xpress, keep spares in your pitbag so your race day doesn't end early!..
Model: XP-10114
Description:
This is Xpress Execute Aluminium FF Lower One Piece Suspension Mount for XQ1 XQ10 XQ10F XQ1S XQ2S XM1 XM1S FT1 FT1S FM1S, genuine official replacement part from Xpress.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the original comp..
Model: XP-10637
Description:
Aluminum one piece FR suspension mount for all of the Execute Series Chassis, enlarged slot also allow the mount to use with the XQ1 Mid motor conversion kit!!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis for replacing the original comp..
Model: XP-10423
Description:
Execute FT1 genuine official replacement part from Xpress.When use as upgrade parts for FT1S, need to use with anti-roll bar assemble including:#XP-10177 Anti-Roll Bar 1.3mm Front and Rear#XP-10364 Execute XQ1 Aluminum Anti-Roll Bar Bushing#XP-40060 Steering Rack Bearing 3x6x2.5mm..
Model: XP-10570
Description:
Execute FT1/FT1S genuine official replacement part from Xpress...
Model: XP-10425
Description:
Execute FT1 / FT1S genuine official replacement part from Xpress...
Model: XP-10426
Description:
Execute FT1/FT1S genuine official replacement part from Xpress...
Model: XP-10125
Description:
This is Xpress Execute and GripXero Aluminium Gear Diff Outdrive Adaptor 1 Pair, genuine official replacement part from Xpress...
Model: XP-10494
Description:
This is an original replacement parts for XQ10, FT1 FT1S, also a direct upgrade parts of XQ2S and FM1S from composite steering post to aluminum post.It also compatible with older Execute chassis for upgrade or setting part. For XQ1 XQ1S XM1 XM1S, this lowered steering posts for install ..
Model: XP-10427
Description:
Execute FT1/FT1S genuine official replacement part from Xpress...
Model: XP-10124
Description:
This is Xpress Execute RR Lower One Piece Suspension Mount, genuine official replacement part from Xpress.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 Eccen..
Model: XP-10683
Description:
Designed to be used with the Flex Eliminator Upper Deck, this set will allow you to limit longitudinal chassis flex whilst retaining lateral chassis flex. What this allows is corner grip but increasing forward traction! Use the aluminum collar if you wish to limit flex in all directions..
Model: XP-10129
Description:This is Xpress Aluminium 5mm Wheel Hub Red Pair, fits all shafts with 5mm axle. Genuine official replacement part from Xpress...
Model: XP-10365
Description:
Larger offset wheel adaptor in 6mm width for a large variety of cars!..
Model: XP-10654
Description:Hate tape? Use this free float battery mount for you Execute series of cars! By removing the need for battery tape, it removes the unwanted tweak generated when applied across the battery. Your choice of using the supplied tabs or velcro!..
Model: XP-10176
Description:
This is Xpress genuine official replacement part for Execute Touring Series. Included are a set of front and rear rollbars...
Model: XP-10177
Description:
This is Xpress genuine official replacement part for Execute Touring Series. Included are a set of front and rear rollbars...
Model: XP-10178
Description:
This is Xpress genuine official replacement part for Execute Touring Series. Included are a set of front and rear rollbars...
Model: XP-10575
Description:
Belts made from a kevlar material for the Execute FT1 series, made for longer lifespan but sacrificing some durability at the same time for use when using high powered motors!..
Model: XP-10819
Description:Body support braces to be used in conjunction with the new V2 Strong C Hubs, found on the Execute XQ2S, DR1S or even for upgrading your Execute series car!**Note: For Execute XQ1, XQ10, XQ10F, XM1, FT1, XQ1S, XM1S, FT1S, FM1S, need to use with V2 Strong Composite C Hub 4 Degree #XP-10400..
Model: XP-10198
Description:
Using these brass suspension pieces allows you to increase the weight without affecting the left to right balance! Direct replacement for the original two piece suspension mount.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing th..
Model: XP-10186
Description:
Brass made balancing weights which screw onto the chassis plate of the Execute series and secured in place with another locking pin...
Model: XP-10199
Description:
Using this brass suspension piece allows you to increase the weight without affecting the left to right balance!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 ..
Model: XP-10197
Description:
Adjust your chassis stiffness by changing to this optional one piece suspension mount for the rear of the front-end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected! Using this brass suspension piece allows y..
Model: XP-10638
Description:
Brass one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well! Use for more stability on high traction tracks!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Exe..
Model: XP-10196
Description:
Adjust your chassis stiffness by changing to this optional one piece suspension mount for the front of the rear end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected! Using this brass suspension piece allows y..
Model: XP-10200
Description:
Using this brass suspension piece allows you to increase the weight without affecting the left to right balance!Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 E..
Model: XP-10164
Description:
This is C Hub King Pin Set for Execute Series, genuine official replacement part from Xpress...
Model: XP-10255
Description:This is Xpress Camber Stiffener Link Ball End for Execute Series, genuine official replacement part from Xpress...
Model: XP-10220
Description:
Camberlink stiffener for the Xpress Execute Series Tourings! By changing the link to a triangular link system, the c-hub is sitffened and provides predictable handling. After extensive testing, this modification is suitable for High grip tracks.*Note: This set does not fit with Xpress s..
Model: XP-10187
Description:
Sometimes you want to add weight to your car, but not wanting to mess up the left right balance. Use these central weights to add weight to the center of the chassis! Comes with both 15 and 25g for you to choose from!
*Note: This option is only suitable for XQ1, XQ1S, XQ2S, FT1 and FT1S..
Model: XP-10717
Description:Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under pressure and will not tweak!Note: Whilst ..
Model: XP-10652
Description:
Genuine official replacement part from Xpress, official replacement part for the Execute XQ10**Note: If using this part with older type of anti-roll bars, you may need to purchase also the Set Screw 3x3mm #XP-40052 and 4.8mm Ball 10mm Thread #XP-10239...
Model: XP-10270
Description:
This is Xpress Execute Composite Center Pulley 20T, genuine official replacement part from Xpress...