Search Criteria
Products meeting the search criteria
Model: XP-10602
Description:New 3.0mm outer suspension pins, to be used with the new "Strong" series of redesigned suspension arms for the Execute series!**Note: If use this part on XQ1 or XQ1S, need to use with Composite Suspension Parts Set Hard Strong #XP-10565 or Strong Composite Suspension Parts Set #XP-10606..
Model: XP-10334
Spring steel double jointed universals with a replaceable pin to exchange when worn out! Smoother cornering when compared to traditional single jointed universals!
Note: When using this part for upgrading the universal shaft from XQ1S, XQ2S, FT1S and DR1S, need to change the 5x10x4mm ball bearing at..
Model: XP-10148
Description:
This is Xpress 4.8mm Ball 5mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10149
Description:
This is Xpress 4.8mm Ball 6mm Thread, 10 pcs package, genuine official replacement part from Xpress...
Model: XP-10150
Description:
This is Xpress 4.8mm Ball 8mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10987
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-11016
Description:Aluminum gear differential outdrives for a more lightweight drivetrain increasing braking and acceleration response!..
Model: XP-10948
Description:This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle...
Model: XP-10895
Description:This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle...
Model: XP-40086
Reduce the amount of free play you might get from bearing slop in your driveshafts with these shims. Applicable to the front or rear...
Model: XP-10811
Description:
Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..
Model: XP-10812
Description:
Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..
Model: XP-11055
Description:Aluminum bottom chassis for Execute MF1, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity!..
Model: XP-10891
Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!..
Model: XP-10892
Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!..
Model: XP-10818
Description:Replacement parts for the Xpress Arrow AT1, genuine part for Xpress series of cars...
Model: XP-10936
Description:Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are required for installing these C-Hubs..
Model: XP-10974
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10983
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10114
Description:
This is Xpress Execute Aluminium FF Lower One Piece Suspension Mount for XQ1 XQ10 XQ10F XQ1S XQ2S XM1 XM1S FT1 FT1S FM1S, genuine official replacement part from Xpress.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the original comp..
Model: XP-10637
Description:
Aluminum one piece FR suspension mount for all of the Execute Series Chassis, enlarged slot also allow the mount to use with the XQ1 Mid motor conversion kit!!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis for replacing the original comp..
Model: XP-10971
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10579
Description:
Replacement part for the Execute XQ10 XQ10F..
Model: XP-10964
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10972
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10978
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10975
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10976
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10124
Description:
This is Xpress Execute RR Lower One Piece Suspension Mount, genuine official replacement part from Xpress.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 Eccen..
Model: XP-10966
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10119
This is Aluminium 3x5.5x1.0mm Shim 20 pieces pack, genuine official replacement part from Xpress...
Model: XP-10241
This is Xpress genuine official replacement part for Execute...
Model: XP-40156
Description:Genuine replacement part for Xpress series of cars...
Model: XP-10580
Description:
Replacement part for the Execute XQ10 XQ10F..
Model: XP-10578
Description:
Replacement part for the Execute XQ10 XQ10F Short Shock...
Model: XP-10967
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10969
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10968
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-11072
Description:Lightweight aluminum flex screws for use to adjust flex in your top deck...
Model: XP-10973
Description:Geniune Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-20016
Narrow wheel hexes for easy trackwidth setup change! Fits modern touring cars which use the hex and locknut wheel mounting system. Laser engraving for you to easily see what width optional wheel hex it is...
Model: XP-20015
Narrow wheel hexes for easy trackwidth setup change! Fits modern touring cars which use the hex and locknut wheel mounting system. Laser engraving for you to easily see what width optional wheel hex it is...
Model: XP-10883
Description:Replacement parts for the Xpress Arrow AT1, genuine part for Xpress series of cars...
Model: XP-10055
Description:
This is Xpress Body Clips 20pcs,genuine official replacement part from Xpress...
Model: XP-10819
Body support braces to be used in conjunction with the new V2 Strong C Hubs, found on the Execute XQ2S, DR1S or even for upgrading your Execute series car!**Note: For Execute XQ1, XQ10, XQ10F, XM1, FT1, XQ1S, XM1S, FT1S, FM1S, need to use with V2 Strong Composite C Hub 4 Degree #XP-10400 or Hard Str..
Model: XP-10638
Description:
Brass one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well! Use for more stability on high traction tracks!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Exe..
Model: XP-10927
Description:
Replacement 90g front lower brass piece for use with cars that feature the integrated bumper weight...
Model: XP-10200
Description:
Using this brass suspension piece allows you to increase the weight without affecting the left to right balance!Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 E..
Model: XP-10925
Description:
Optional 90g front upper brass piece for use with cars that feature the integrated bumper weight...
Model: XP-40039
Genuine replacement part for Xpress series of cars...
Model: XP-40040
Genuine replacement part for Xpress series of cars...
Model: XP-40037
Genuine replacement part for Xpress series of cars...
Model: XP-40038
Genuine replacement part for Xpress series of cars...
Model: XP-10985
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10970
Description:Replacement part for the Execute MF1, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10159
Description:
This is Execute Composite 1.1mm Piston Spacer Set, genuine official replacement part from Xpress...
Model: XP-11181
Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under pressure and will not tweak! Version 2 comes included..
Model: XP-10652
Description:
Genuine official replacement part from Xpress, official replacement part for the Execute XQ10**Note: If using this part with older type of anti-roll bars, you may need to purchase also the Set Screw 3x3mm #XP-40052 and 4.8mm Ball 10mm Thread #XP-10239...