Search Criteria
Products meeting the search criteria
Model: XP-10129
Description:This is Xpress Aluminium 5mm Wheel Hub Red Pair, fits all shafts with 5mm axle. Genuine official replacement part from Xpress...
Model: XP-10486
Description:
Spare upper deck for Xpress Execute XM1 with the 239mm converison kit!..
Model: XP-10485
Description:
Spare chassis plate for Xpress Execute XM1 with the 239mm converison kit!..
Model: XP-10391
Description:
For use with the Xpress Execute XM1 on highspeed tracks or in situations where stability is required. By extending the wheelbase by 15mm, you gain more stability by having a car less willing to rotate in the corners and will give you a car that will be easier to drive...
Model: XP-10393
Description:
Spare chassis plate for Xpress Execute XM1 with the 225mm converison kit..
Model: XP-10394
Description:
Spare upper deck for Xpress Execute XM1 with the 225mm converison kit..
Model: XP-10483
Description:
For use with the Xpress Execute XM1 on highspeed tracks or in situations where stability is required. By extending the wheelbase by 29mm, you gain more stability by having a car less willing to rotate in the corners and will give you a car that will be easier to drive, will be recommend..
Model: XP-10137
Description:This is Execute XQ1 Graphite Floating Servo Holder, genuine official replacement part from Xpress...
Model: XP-40002
Description:
Cool your ESC in hot temperatures with this aluminum cased fan. With the aluminum case, allowing for it to act as a heatsink to help dissipate heat..
Model: XP-10289
Description:
Execute XM1 XM1S FM1S genuine official replacement part from Xpress...
Model: XP-10377
Description:
Flat pin suspension pivot pin, for use in both the front C hub and rear hub. The flat spot allows for more surface area for the set screw to secure the pin in place and prevent it from flying out...
Model: XP-10378
Description:
Replacement damper piston for Xpress's K1 M1 XQ1S XM1S D1 FM1S, featuring four holes for a lighter dampening effect in your shocks!..
Model: XP-10151
Description:This is Xpress 4.8mm Ball 10mm Thread, 10pcs package, genuine official replacement part...
Model: XP-10239
Description:This is Xpress 4.8mm Ball 10mm Thread 4pcs, genuine official replacement parts for Xpress...
Model: XP-10148
Description:
This is Xpress 4.8mm Ball 5mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10236
Description:This is Xpress 4.8mm ball 5mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10149
Description:
This is Xpress 4.8mm Ball 6mm Thread, 10 pcs package, genuine official replacement part from Xpress...
Model: XP-10237
Description:This is Xpress 4.8mm Ball 6mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10150
Description:
This is Xpress 4.8mm Ball 8mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10002
Description:This is Xpress 4.8mm Ball End Set & Ball Bearing Hub, genuine official replacement part from Xpress...
Model: XP-10253
Description:
This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10254
Description:
A redesigned ball end set for replacing all the 4.8mm ball ends on the Execute XQ1 / XQ1S. Also compatible with other Execute Series Chassis...
Model: XP-40088
Xpress 7075 Aluminum Turnbuckle 24mm 2pcs #XP-40088
Description:
Red turnbuckles to upgrade your existing Xpress vehicle to match the turnbuckles to the red on the rest of your car!..
Model: XP-40089
Description:Red turnbuckles to upgrade your existing Xpress vehicle to match the turnbuckles to the red on the rest of your car!..
Model: XP-40091
Description:
Red turnbuckles to upgrade your existing Xpress vehicle to match the turnbuckles to the red on the rest of your car!..
New
Model: XP-10811
Description:
Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..
New
Model: XP-10812
Description:
Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..
Model: XP-10386
Description:
Aluminum lowered shock tower for Xpress Execute FM1S, XM1 and XM1S! Features 1mm lowered mounting holes for improved stability throughout the corners! Less lateral flex when compared to carbon fibre, providing even more stability throughout the corner!..
Model: XP-10385
Description:
Aluminum lowered shock tower for Xpress Execute XM1 and XM1S! Features 1mm lowered mounting holes for improved stability throughout the corners! Less lateral flex when compared to carbon fibre, providing even more stability throughout the corner!..
Model: XP-10123
Description:
This is Xpress Execute 2 Piece Suspension Mount Pair, genuine official replacement part from Xpress. These can be used either in the FR or RF position.Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the original composite suspension mo..
Model: XP-10379
Description:
Aluminum bottom chassis for Execute XQ1, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity!..
Model: XP-10390
Description:
Gain more stability with these aluminum c hubs, reducing flex during high speed cornering for more stability...
Model: XP-10224
Description:
Gain more mid corner control with this 5mm Ackermann Steering plate! By changing the angle of ackermann, you will notice better control-ability of the car during mid corner and acceleration out of the corner!..
Model: XP-10368
Description:
Execute XM1 genuine official replacement part from Xpress...
Model: XP-10369
Description:
Execute XM1 genuine official replacement part from Xpress...
Model: XP-10192
Description:
Adjustable LiPo stoppers for easily securing LiPos of different lengths...
New
Model: XP-10889
Description:
Aluminium Anti-Roll Bar Bushing, genuine official replacement part from Xpress. Included are two pieces that can be inserted into the bulkhead or attaches to the end of the roll bar...
Model: XP-10111
Description:
Genuine official replacement part from Xpress, keep spares in your pitbag so your race day doesn't end early!..
Model: XP-10114
Description:
This is Xpress Execute Aluminium FF Lower One Piece Suspension Mount for XQ1 XQ10 XQ10F XQ1S XQ2S XM1 XM1S FT1 FT1S FM1S, genuine official replacement part from Xpress.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the original comp..
Model: XP-10637
Description:
Aluminum one piece FR suspension mount for all of the Execute Series Chassis, enlarged slot also allow the mount to use with the XQ1 Mid motor conversion kit!!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis for replacing the original composite ..
Model: XP-10104
Description:
This is Xpress Aluminum Front One Piece Upper Clamp For Execute Series, genuine official replacement part from Xpress...
Model: XP-10125
Description:
This is Xpress Execute and GripXero Aluminium Gear Diff Outdrive Adaptor 1 Pair, genuine official replacement part from Xpress...
Model: XP-10274
Description:
Aluminum layshaft bulkheads for people who wish to run high powered motors. These aluminum pieces will keep the layshaft straight under hard acceleration and braking...
Model: XP-10145
Description:
This is Execute XQ1 XM1 FT1 Aluminium Lower Shock Cap Pair, genuine official replacement part from Xpress...
Model: XP-10494
Description:
This is an original replacement parts for XQ10, FT1 FT1S, also a direct upgrade parts of XQ2S and FM1S from composite steering post to aluminum post.It also compatible with older Execute chassis for upgrade or setting part. For XQ1 XQ1S XM1 XM1S, this lowered steering posts for install ..
Model: XP-10310
Description:
Aluminum fan mount which screws onto the rear lead weight hole, for a secure way to mount a motor fan! Flat slot which uses one screw which stops the fan from rotating on the mount...
Model: XP-10388
Description:
Gain more stability with these aluminum upright offerings, the camberlink hole is of a middle hole when compared to the plastic part giving a more neutral handling feel...
Model: XP-10124
Description:
This is Xpress Execute RR Lower One Piece Suspension Mount, genuine official replacement part from Xpress.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 Eccentric B..
Model: XP-10136
Description:This is Execute XQ1 Aluminium Servo Mount, genuine official replacement part from Xpress...
Model: XP-10240
Description:
This is Xpress genuine official replacement part for Execute ...
Model: XP-10241
Description:
This is Xpress genuine official replacement part for Execute ...
Model: XP-10175
Description:
This is Xpress Execute XQ1 XQ1S XQ2S XM1S Aluminium Solid Layshaft, genuine official replacement part from Xpress...
Model: XP-10161
Description:This is Execute Aluminium Spring Tension Adjust Nut Pair, genuine official replacement part from Xpress...
Model: XP-10389
Description:
Gain more stability with these aluminum steering blocks, reducing flex during high speed cornering for more stability...
Model: XP-10113
Description:
This is Xpress Execute XQ1 XQ1S XQ2S FT1 FT1S FM1S Aluminium Steering Plate For Dual Servo Saver 4mm, genuine official replacement part from Xpress...
Model: XP-10387
Description:
Bling bumper holder for Xpress series of cars! Offers more protection over the stock plastic part...
Model: XP-10365
Description:
Larger offset wheel adaptor in 6mm width for a large variety of cars!..
Model: XP-20016
Description:
Narrow wheel hexes for easy trackwidth setup change! Fits modern touring cars which use the hex and locknut wheel mounting system. Laser engraving for you to easily see what width optional wheel hex it is...
Model: XP-20015
Description:
Narrow wheel hexes for easy trackwidth setup change! Fits modern touring cars which use the hex and locknut wheel mounting system. Laser engraving for you to easily see what width optional wheel hex it is...
Model: XP-10654
Description:Hate tape? Use this free float battery mount for you Execute series of cars! By removing the need for battery tape, it removes the unwanted tweak generated when applied across the battery. Your choice of using the supplied tabs or velcro!..