Search Criteria
Products meeting the search criteria
Model: XP-10137
Description:This is Execute XQ1 Graphite Floating Servo Holder, genuine official replacement part from Xpress...
Model: XP-10377
Description:
Flat pin suspension pivot pin, for use in both the front C hub and rear hub. The flat spot allows for more surface area for the set screw to secure the pin in place and prevent it from flying out...
Model: XP-10151
Description:This is Xpress 4.8mm Ball 10mm Thread, 10pcs package, genuine official replacement part...
Model: XP-10239
Description:This is Xpress 4.8mm Ball 10mm Thread 4pcs, genuine official replacement parts for Xpress...
Model: XP-10148
Description:
This is Xpress 4.8mm Ball 5mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10236
Description:This is Xpress 4.8mm ball 5mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10149
Description:
This is Xpress 4.8mm Ball 6mm Thread, 10 pcs package, genuine official replacement part from Xpress...
Model: XP-10237
Description:This is Xpress 4.8mm Ball 6mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10150
Description:
This is Xpress 4.8mm Ball 8mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10253
Description:
This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10682
Description:This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10254
Description:
A redesigned ball end set for replacing all the 4.8mm ball ends on the Execute XQ1 / XQ1S. Also compatible with other Execute Series Chassis...
Model: XP-10948
Description:This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle...
Model: XP-10895
Description:This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle...
Model: XP-40086
Description:
Reduce the amount of free play you might get from bearing slop in your driveshafts with these shims. Applicable to the front or rear...
Model: XP-10811
Description:
Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..
Model: XP-10812
Description:
Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..
Model: XP-10386
Description:
Aluminum lowered shock tower for Xpress Execute FM1S, XM1 and XM1S! Features 1mm lowered mounting holes for improved stability throughout the corners! Less lateral flex when compared to carbon fibre, providing even more stability throughout the corner!..
Model: XP-10385
Description:
Aluminum lowered shock tower for Xpress Execute XM1 and XM1S! Features 1mm lowered mounting holes for improved stability throughout the corners! Less lateral flex when compared to carbon fibre, providing even more stability throughout the corner!..
Model: XP-10123
Description:
This is Xpress Execute 2 Piece Suspension Mount Pair, genuine official replacement part from Xpress. These can be used either in the FR or RF position.Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S. DR1s and other sport series Execute Chassis replacing the original composite suspens..
Model: XP-10379
Description:
Aluminum bottom chassis for Execute XQ1, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity!..
Model: XP-10947
Description:Aluminum upgrade pulley for Xpress sport series of cars, upgrade on the durability at the cost of a heavier drivetrain...
Model: XP-10390
Description:
Gain more stability with these aluminum c hubs, reducing flex during high speed cornering for more stability...
Model: XP-10224
Description:
Gain more mid corner control with this 5mm Ackermann Steering plate! By changing the angle of ackermann, you will notice better control-ability of the car during mid corner and acceleration out of the corner!..
Model: XP-10891
Description:
Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!..
Model: XP-10369
Description:
Execute XM1 genuine official replacement part from Xpress...
Model: XP-10889
Description:
Aluminium Anti-Roll Bar Bushing, genuine official replacement part from Xpress. Included are two pieces that can be inserted into the bulkhead or attaches to the end of the roll bar...
Model: XP-10111
Description:
Genuine official replacement part from Xpress, keep spares in your pitbag so your race day doesn't end early!..
Model: XP-10114
Description:
This is Xpress Execute Aluminium FF Lower One Piece Suspension Mount for XQ1 XQ10 XQ10F XQ1S XQ2S XM1 XM1S FT1 FT1S FM1S, genuine official replacement part from Xpress.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the original comp..
Model: XP-10637
Description:
Aluminum one piece FR suspension mount for all of the Execute Series Chassis, enlarged slot also allow the mount to use with the XQ1 Mid motor conversion kit!!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis for replacing the original comp..
Model: XP-10104
Description:
This is Xpress Aluminum Front One Piece Upper Clamp For Execute Series, genuine official replacement part from Xpress...
Model: XP-10125
Description:
This is Xpress Execute and GripXero Aluminium Gear Diff Outdrive Adaptor 1 Pair, genuine official replacement part from Xpress...
Model: XP-10494
Description:
This is an original replacement parts for XQ10, FT1 FT1S, also a direct upgrade parts of XQ2S and FM1S from composite steering post to aluminum post.It also compatible with older Execute chassis for upgrade or setting part. For XQ1 XQ1S XM1 XM1S, this lowered steering posts for install ..
Model: XP-10388
Description:
Gain more stability with these aluminum upright offerings, the camberlink hole is of a middle hole when compared to the plastic part giving a more neutral handling feel...
Model: XP-10124
Description:
This is Xpress Execute RR Lower One Piece Suspension Mount, genuine official replacement part from Xpress.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 Eccen..
Model: XP-10136
Description:This is Execute Aluminium Servo Mount, genuine official replacement part from Xpress...
Model: XP-10161
Description:This is Execute Aluminium Spring Tension Adjust Nut Pair, genuine official replacement part from Xpress...
Model: XP-10389
Description:
Gain more stability with these aluminum steering blocks, reducing flex during high speed cornering for more stability...
Model: XP-10387
Description:
Bling bumper holder for Xpress series of cars! Offers more protection over the stock plastic part...
Model: XP-10129
Description:This is Xpress Aluminium 5mm Wheel Hub Red Pair, fits all shafts with 5mm axle. Genuine official replacement part from Xpress...
Model: XP-10365
Description:
Larger offset wheel adaptor in 6mm width for a large variety of cars!..
Model: XP-20015
Description:
Narrow wheel hexes for easy trackwidth setup change! Fits modern touring cars which use the hex and locknut wheel mounting system. Laser engraving for you to easily see what width optional wheel hex it is...
Model: XP-10654
Description:Hate tape? Use this free float battery mount for you Execute series of cars! By removing the need for battery tape, it removes the unwanted tweak generated when applied across the battery. Your choice of using the supplied tabs or velcro!..
Model: XP-10314
Description:
Execute XM1 XM1S FM1S genuine official replacement part from Xpress...
Model: XP-10316
Description:
Execute XM1 XM1S FM1S genuine official replacement part from Xpress...
Model: XP-10350
Description:
Bando branded belts for the Execute XM1 / XM1S, made for longer lifespan but sacrificing some durability at the same time for use when using high powered motors!..
Model: XP-10351
Description:
Bando branded belts for the Execute XM1 series, made for longer lifespan but sacrificing some durability at the same time for use when using high powered motors!..
Model: XP-10198
Description:
Using these brass suspension pieces allows you to increase the weight without affecting the left to right balance! Direct replacement for the original two piece suspension mount.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing th..
Model: XP-10199
Description:
Using this brass suspension piece allows you to increase the weight without affecting the left to right balance!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 ..
Model: XP-10196
Description:
Adjust your chassis stiffness by changing to this optional one piece suspension mount for the front of the rear end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected! Using this brass suspension piece allows y..
Model: XP-10200
Description:
Using this brass suspension piece allows you to increase the weight without affecting the left to right balance!Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 E..
Model: XP-10164
Description:
This is C Hub King Pin Set for Execute Series, genuine official replacement part from Xpress...
Model: XP-10255
Description:This is Xpress Camber Stiffener Link Ball End for Execute Series, genuine official replacement part from Xpress...
Model: XP-10159
Description:
This is Execute Composite 1.1mm Piston Spacer Set, genuine official replacement part from Xpress...
Model: XP-10717
Description:Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under pressure and will not tweak!Note: Whilst ..
Model: XP-10652
Description:
Genuine official replacement part from Xpress, official replacement part for the Execute XQ10**Note: If using this part with older type of anti-roll bars, you may need to purchase also the Set Screw 3x3mm #XP-40052 and 4.8mm Ball 10mm Thread #XP-10239...
Model: XP-10270
Description:
This is Xpress Execute Composite Center Pulley 20T, genuine official replacement part from Xpress...
Model: XP-10699
Description:Replacement upper bulkhead set for the Execute XQ2S.
Comparing to older version of composite bulkhead from the other Execute Sport series chassis, the V2 bulkhead comes with one more hole for positioning the camber link, allows you to adjust the roll-center in another way. It also allows..
Model: XP-10265
Description:
Genuine official replacement part from Xpress for XQ1S / XQ2S / XM1S. It also fits XQ1, XQ10F, XM1, FT1, FT1S, FM1S with Composite Spool 38T Set #XP-10264, which is the original parts of XQ10...
Model: XP-10671
Description:Titanium lightweight yet tough and durable spool outdrives for all forms of racing! Specially re-designed shape to make use of the full outdrive blade to get instantaneous power delivery! The lower weight increases the drive train efficiency. This out drive also fit the front plastic spo..