Search Criteria
Products meeting the search criteria
Model: XP-11061
Description:Aluminum bottom chassis for Execute XQ11, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity!..
Model: XP-11096
Description:Optional split top deck to get more chassis flex and grip from your Execute XQ11! ..
Model: XP-11111
Description:Optional split top deck to get more chassis flex and grip from your Execute XQ11! ..
Model: XP-10552
Description:
Replacement upper deck for the Execute XQ10, stiffness can be tuned with the aluminum inserts!..
Model: XP-10713
Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short!..
Model: XP-11057
Description:Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10490
Description:
Replacement part for the Mid Motor Conversion kit for Execute XQ1...
Model: XP-10866
Description:
Optional Graphite Chassis plate for the Execute XQ2S, XQ1S and XQ1 giving you better performance at high temperature tracks and provides more consistent handling when compared to the stock chassis...
Model: XP-10551
Description:
Replacement chassis plate for Xpress Execute XQ10, made from high quality high weave carbon which retains it's elasticity for a long time giving you a consistent handling car...
Model: XP-10867
Description:Aluminum bottom chassis for Execute XQ2S, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity! It also fits with XQ1 and XQ1S...
Model: XP-10733
Description:Optional Graphite Top deck for the Execute FM1S, giving you better performance at high temperature tracks!This is also the out of box front top deck for XQ10F...
Model: XP-10714
Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short!..
Model: XP-11017
Description:Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short! ..
Model: XP-10343
Description:
Replacement part for the Mid Motor Conversion kit for Execute XQ1 and XQ10..
Model: XP-10137
Description:This is Execute XQ1 Graphite Floating Servo Holder, genuine official replacement part from Xpress...
Model: XP-10602
Description:New 3.0mm outer suspension pins, to be used with the new "Strong" series of redesigned suspension arms for the Execute series!**Note: If use this part on XQ1 or XQ1S, need to use with Composite Suspension Parts Set Hard Strong #XP-10565 or Strong Composite Suspension Parts Set #XP-10606..
Model: XP-10334
Description:
Spring steel double jointed universals with a replaceable pin to exchange when worn out! Smoother cornering when compared to traditional single jointed universals!
Note: When using this part for upgrading the universal shaft from XQ1S, XQ2S, FT1S and DR1S, need to change the 5x10x4mm b..
Model: XP-11044
Description:Steel Double Joint Universal Shaft Pair for Execute Series Touring Chassis, genuine official replacement part from Xpress. With double joint universal shaft will greatly minimize the vibration of the outside front wheel in corners and improves the cornering speed and stability. These mea..
Model: XP-11280
3D printed TPU bumper, offering enough support to keep body from deforming during cornering whilst also absorbing hits! Curved base reduced the chance of the bumper from scraping on the floor and giving you better cornering efficiency...
Model: XP-10716
Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short!..
Model: XP-10151
Description:This is Xpress 4.8mm Ball 10mm Thread, 10pcs package, genuine official replacement part...
Model: XP-10239
Description:This is Xpress 4.8mm Ball 10mm Thread 4pcs, genuine official replacement parts for Xpress...
Model: XP-10148
Description:
This is Xpress 4.8mm Ball 5mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10236
Description:This is Xpress 4.8mm Ball 5mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10149
Description:
This is Xpress 4.8mm Ball 6mm Thread, 10 pcs package, genuine official replacement part from Xpress...
Model: XP-10237
Description:This is Xpress 4.8mm Ball 6mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10150
Description:
This is Xpress 4.8mm Ball 8mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10002
Description:This is Xpress 4.8mm Ball End Set & Ball Bearing Hub, genuine official replacement part from Xpress...
Model: XP-10253
Description:
This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10682
Description:This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10254
Description:
A redesigned ball end set for replacing all the 4.8mm ball ends on the Execute XQ1 / XQ1S. Also compatible with other Execute Series Chassis...
Model: XP-11016
Description:Aluminum gear differential outdrives for a more lightweight drivetrain increasing braking and acceleration response!..
Model: XP-10948
Description:This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle...
Model: XP-10895
Description:This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle...
Model: XP-40086
Description:
Reduce the amount of free play you might get from bearing slop in your driveshafts with these shims. Applicable to the front or rear...
Model: XP-40273
Description:Titanium turnbuckles for use on the Xpress Execute XQ3S / XQ11 / XQ11R, longer length than original and a machined 1.5mm hex slot for easy installation!..
Model: XP-10981
Description:Lift your servo, receiver and fan off your chassis to not affect your chassis flex. Graphite piece which extends from underneath the servo for you to stick your electronics on. Use the 70mm plate on mid mount cars and 90mm on standard layout cars (XQ1, XQ2S)..
Model: XP-10980
Description:Lift your servo, receiver and fan off your chassis to not affect your chassis flex. Graphite piece which extends from underneath the servo for you to stick your electronics on. Choice of lifting either only the servo or electronics as well with the both plates included...
Model: XP-10811
Description:
Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..
Model: XP-10812
Description:
Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..
Model: XP-11175
Description:Top deck stiffener screws for use with 1.6mm top decks only...
Model: XP-11177
Description:Optional top deck stiffener, to be used in the rear stiffener slot. Note: To be used only with 1.6mm thickness topdecks ..
Model: XP-10650
Description:
Original replacement part for Execute XQ10 and XQ10F...
Model: XP-10123
Description:
This is Xpress Execute 2 Piece Suspension Mount Pair, genuine official replacement part from Xpress. These can be used either in the FR or RF position.Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S. DR1s and other sport series Execute Chassis replacing the original composite suspens..
Model: XP-10947
Description:Aluminum upgrade pulley for Xpress sport series of cars, upgrade on the durability at the cost of a heavier drivetrain...
Model: XP-10629
Description:
Aluminum center pulley for the Execute XQ10, providing more durability at the expense of drivetrain efficiency. Recommended for use in high powered touring car racing classes. Spur secures on the A side with screws...
Model: XP-10632
Description:
Aluminum center pulley for the Execute XQ10, providing more durability at the expense of drivetrain efficiency. Recommended for use in high powered touring car racing classes...
Model: XP-11073
Description:Aluminum aluminum pivot balls for use in Execute Shocks, lightweight and smoother shock operation! ..
Model: XP-10224
Description:
Gain more mid corner control with this 5mm Ackermann Steering plate! By changing the angle of ackermann, you will notice better control-ability of the car during mid corner and acceleration out of the corner!..
Model: XP-10891
Description:
Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!..
Model: XP-10892
Description: Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!..
Model: XP-10835
Description:Adjust the distance between the two ballends on the steering bridge with this insert steering bridge system! What this achieves is different ackermann settings and adjusts how much steering angle difference you can achieve between the outside and inside tires when you turn. By using a la..
Model: XP-10745
Description:Adjust the distance between the two ballends on the steering bridge with this insert steering bridge system! What this achieves is different ackermann settings and adjusts how much steering angle difference you can achieve between the outside and inside tires when you turn. By using a la..
Model: XP-11067
Description:Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short! ..
Model: XP-10192
Description:
Adjustable LiPo stoppers for easily securing LiPos of different lengths...
Model: XP-11056
Description:Aluminum mount spring loaded battery mount for the Execute XQ11! Mix of aluminum and graphite components make for a strong and lightweight battery mounting solution...
Model: XP-10818
Description:Replacement parts for the Xpress Arrow AT1, genuine part for Xpress series of cars...
Model: XP-11076
Description:Replacement belt tension locknut set for the Execute XQ11 motor mount bottom belt tensioner. ..
Model: XP-10935
Description:Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Also included are the new kingpin sets which are required for installing these C-Hubs..