Menu
Your Cart

Car Parts

Replacement & Upgrade Parts for Xpress RC Cars, Execute, GripXero, Xpresso & Stix Series

Model: XP-10062
Xpress Xpresso K1 M1 1.0mm Front Anti-Roll Bar Set #XP-10062 Description: Add anti-roll bars to either your Xpresso K1 or M1 with this rollbar set, included is all required hardware requried to install a rollbar to your car in this package. The longer 1.0mm rollbar is for the M1 and the shorter one ..
Model: XP-10064
Xpress Xpresso K1 M1 1.0mm Rear Anti-Roll Bar Set #XP-10064 Description: Add anti-roll bars to either your Xpresso K1 or M1 with this rollbar set, included is all required hardware requried to install a rollbar to your car in this package. The longer 1.0mm rollbar is for the M1 and the shorter one i..
Model: XP-10129
Description:This is Xpress Aluminium 5mm Wheel Hub Red Pair, fits all shafts with 5mm axle. Genuine official replacement part from Xpress...
Model: XP-10640
Description: Aluminum bottom chassis for both Execute FT1, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity! Note: When use with Execute FT1S, need to install the Separated Bulkhead Typ..
Model: XP-10653
Description: Aluminum bottom chassis for Execute XQ10, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity!..
Model: XP-10017
Xpress 2.0mm Graphite Chassis For K1 #XP-10017 Description:This is Xpress Xpresso K1 2.0mm Graphite Chassis, genuine official replacement part from Xpress...
Model: XP-10619
Description: High clearance Top Deck for use with our Mid Motor Conversion Kit #XP-10495, more space for big pinions through the extended cut out point! Will be handy with 21.5t blinky classes such as VTA or GT!..
Model: XP-10486
Description: Spare upper deck for Xpress Execute XM1 with the 239mm converison kit!..
Model: XP-10552
Description: Replacement upper deck for the Execute XQ10, stiffness can be tuned with the aluminum inserts!..
Model: XP-10639
Description: Designed to be used with the Flex Elimuinator Bearing and Collar set #XP-10683, this set will allow you to limit longitudinal chassis flex whilst retaining lateral chassis flex. What this allows is corner grip but increasing forward traction!..
Model: XP-10092
Xpress 2.0mm Graphite Upper Deck Pair For Xpresso M1 #XP-10092 Description: This is Xpress 2.0mm Graphite Upper Deck Pair For Xpresso M1, genuine official replacement part from Xpress...
Model: XP-10485
Description: Spare chassis plate for Xpress Execute XM1 with the 239mm converison kit!..
Model: XP-10713
Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short!..
Model: XP-10490
Description: Replacement part for the Mid Motor Conversion kit for Execute XQ1...
Model: XP-10866
Description: Optional Graphite Chassis plate for the Execute XQ2S, XQ1S and XQ1 giving you better performance at high temperature tracks and provides more consistent handling when compared to the stock chassis...
Model: XP-10551
Description: Replacement chassis plate for Xpress Execute XQ10, made from high quality high weave carbon which retains it's elasticity for a long time giving you a consistent handling car...
Model: XP-10391
Description: For use with the Xpress Execute XM1 on highspeed tracks or in situations where stability is required. By extending the wheelbase by 15mm, you gain more stability by having a car less willing to rotate in the corners and will give you a car that will be easier to drive...
Model: XP-10393
Description: Spare chassis plate for Xpress Execute XM1 with the 225mm converison kit..
Model: XP-10394
Description: Spare upper deck for Xpress Execute XM1 with the 225mm converison kit..
Model: XP-10483
Description: For use with the Xpress Execute XM1 on highspeed tracks or in situations where stability is required. By extending the wheelbase by 29mm, you gain more stability by having a car less willing to rotate in the corners and will give you a car that will be easier to drive, will be recommend..
Model: XP-10867
Description:Aluminum bottom chassis for Execute XQ2S, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity! It also fits with XQ1 and XQ1S...
Model: XP-10733
Description:Optional Graphite Top deck for the Execute FM1S, giving you better performance at high temperature tracks!This is also the out of box front top deck for XQ10F...
Model: XP-10732
Description:Optional Graphite Top deck for the Execute FM1S, giving you better performance at high temperature tracks!..
Model: XP-10714
Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short!..
Model: XP-10343
Description: Replacement part for the Mid Motor Conversion kit for Execute XQ1 and XQ10..
Model: XP-10137
Description:This is Execute XQ1 Graphite Floating Servo Holder, genuine official replacement part from Xpress...
Model: XP-10019
Xpress 3.0mm Graphite Front Shock Tower For Xpresso K1 M1 #XP-10019 Description: This is Xpress 3.0mm Graphite Front Shock Tower, genuine official replacement part from Xpress...
Model: XP-10020
Xpress 3.0mm Graphite Rear Shock Tower For Xpresso K1 M1 #XP-10020 Description: This is Xpress 3.0mm Graphite Rear Shock Tower, genuine official replacement part from Xpress...
Model: XP-10602
Description:New 3.0mm outer suspension pins, to be used with the new "Strong" series of redesigned suspension arms for the Execute series!**Note: If use this part on XQ1 or XQ1S, need to use with Composite Suspension Parts Set Hard Strong #XP-10565 or Strong Composite Suspension Parts Set #XP-10606..
Model: XP-10139
Description:This is 3.0mm Suspension Pivot Pin for Execute series, genuine official replacement part from Xpress...
Model: XP-40002
Description: Cool your ESC in hot temperatures with this aluminum cased fan. With the aluminum case, allowing for it to act as a heatsink to help dissipate heat..
Model: XP-10334
Description: Spring steel double jointed universals with a replaceable pin to exchange when worn out! Smoother cornering when compared to traditional single jointed universals! Note: When using this part for upgrading the universal shaft from XQ1S, XQ2S and FT1S, need to change the 5x10x4mm ball be..
Model: XP-10716
Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short!..
Model: XP-10289
Description: Execute XM1 XM1S FM1S genuine official replacement part from Xpress...
Model: XP-10377
Description: Flat pin suspension pivot pin, for use in both the front C hub and rear hub. The flat spot allows for more surface area for the set screw to secure the pin in place and prevent it from flying out...
Model: XP-10378
Description: Replacement damper piston for Xpress's K1 M1 XQ1S XM1S D1 FM1S, featuring four holes for a lighter dampening effect in your shocks!..
Model: XP-10151
Description:This is Xpress 4.8mm Ball 10mm Thread, 10pcs package, genuine official replacement part...
Model: XP-10239
Description:This is Xpress 4.8mm Ball 10mm Thread 4pcs, genuine official replacement parts for Xpress...
Model: XP-10148
Description: This is Xpress 4.8mm Ball 5mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10043
Description: This is Xpress 4.8mm Ball 5mm Thread, 10pcs package, genuine official replacement part for Xpresso...
Model: XP-10236
Description:This is Xpress 4.8mm ball 5mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10149
Description: This is Xpress 4.8mm Ball 6mm Thread, 10 pcs package, genuine official replacement part from Xpress...
Model: XP-10237
Description:This is Xpress 4.8mm Ball 6mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10150
Description: This is Xpress 4.8mm Ball 8mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10044
Description: This is Xpress 4.8mm Ball Set, genuine official replacement part from Xpress...
Model: XP-10238
Description: This is Xpress genuine official replacement part for Execute ...
Model: XP-10003
Description: This is Xpress 4.8mm Ball End & Suspension Parts, genuine official replacement part from Xpress...
Model: XP-10002
Description:This is Xpress 4.8mm Ball End Set & Ball Bearing Hub, genuine official replacement part from Xpress...
Model: XP-10048
Description: This is Xpress 4.8mm Ball for Upper Link Set, genuine official replacement part from Xpress for Xpresso K1, M1...
Model: XP-10045
Description: This is 4.8mm Ball Inner Thread 10pcs For Xpresso K1 M1, genuine official replacement part from Xpress...
Model: XP-10253
Description: This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10252
Description: This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10251
Description: This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10254
Description: A redesigned ball end set for replacing all the 4.8mm ball ends on the Execute XQ1 / XQ1S. Also compatible with other Execute Series Chassis...
Model: XP-10121
Description: This is 5.5mm Pivot Ball, genuine official replacement part from Xpress...
Model: XP-10047
Xpress 5.5mm Suspersion Arm Ball 3.8mm Thread 10pcs For Xpresso K1 M1 #XP-10047 Description: This is Xpress 5.5mm Suspersion Arm Ball Set, genuine official replacement part from Xpress...
Model: XP-10039
Xpress Aluminum 7075 Damper Cover Set For Xpresso K1 M1 #XP-10039 Description: This is Xpress Aluminum 7075 Damper Cover Set, genuine official replacement part from Xpress...
Showing 1 to 60 of 524 (9 Pages)
Privacy Notice
We use cookies to give you the best possible experience on our website. By continuing to browse this site, you give consent for cookies to be used. For more details please read our Privacy Policy.