Newest Execute touring car, the Xpress XQ10, with modernized updates. Comes in a mid pulley configuration, split bulkheads at a more economical price. Several minor changes to the geometry, for a even more neutral handling car which makes it suitable for a more wider setup window.
Model: XP-20016
Description:
Narrow wheel hexes for easy trackwidth setup change! Fits modern touring cars which use the hex and locknut wheel mounting system. Laser engraving for you to easily see what width optional wheel hex it is...
Model: XP-10654
Description:Hate tape? Use this free float battery mount for you Execute series of cars! By removing the need for battery tape, it removes the unwanted tweak generated when applied across the battery. Your choice of using the supplied tabs or velcro!..
Model: XP-10176
Description:
This is Xpress genuine official replacement part for Execute Touring Series. Included are a set of front and rear rollbars...
Model: XP-10177
Description:
This is Xpress genuine official replacement part for Execute Touring Series. Included are a set of front and rear rollbars...
Model: XP-10178
Description:
This is Xpress genuine official replacement part for Execute Touring Series. Included are a set of front and rear rollbars...
Model: XP-10155
Description:
Full set of Anti-roll bars for the Execute XQ1, XQ10, XQ10F, FT1, ranges from 1.2 to 1.4 which should cover all required roll-bar dimensions for different tracks...
Model: XP-10630
Bando branded belts for the Mid Motor 1/10 Touring Series of Execute Cars, made for longer lifespan but sacrificing some durability at the same time for use when using high powered motors!..
Model: XP-10055
Description:
This is Xpress Body Clips 20pcs,genuine official replacement part from Xpress...
Model: XP-10819
Description:Body support braces to be used in conjunction with the new V2 Strong C Hubs, found on the Execute XQ2S, DR1S or even for upgrading your Execute series car!**Note: For Execute XQ1, XQ10, XQ10F, XM1, FT1, XQ1S, XM1S, FT1S, FM1S, need to use with V2 Strong Composite C Hub 4 Degree #XP-10400..
Model: XP-10198
Description:
Using these brass suspension pieces allows you to increase the weight without affecting the left to right balance! Direct replacement for the original two piece suspension mount.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing th..
Model: XP-10557
Description:
Control flex under the diff/spool area with this easy to install piece of graphite and brass. The brass piece also allows you to tune the weight bias of the car!..
Model: XP-10242
Description:
Brass made balancing weights which screw onto the chassis of the Execute Touring and secured in place with another locking pin...
Model: XP-10186
Description:
Brass made balancing weights which screw onto the chassis plate of the Execute series and secured in place with another locking pin...
Model: XP-10199
Description:
Using this brass suspension piece allows you to increase the weight without affecting the left to right balance!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 ..
Model: XP-10197
Description:
Adjust your chassis stiffness by changing to this optional one piece suspension mount for the rear of the front-end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected! Using this brass suspension piece allows y..
Model: XP-10638
Description:
Brass one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well! Use for more stability on high traction tracks!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Exe..
Model: XP-10196
Description:
Adjust your chassis stiffness by changing to this optional one piece suspension mount for the front of the rear end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected! Using this brass suspension piece allows y..
Model: XP-10200
Description:
Using this brass suspension piece allows you to increase the weight without affecting the left to right balance!Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 E..
Model: XP-10255
Description:This is Xpress Camber Stiffener Link Ball End for Execute Series, genuine official replacement part from Xpress...
Model: XP-10220
Description:
Camberlink stiffener for the Xpress Execute Series Tourings! By changing the link to a triangular link system, the c-hub is sitffened and provides predictable handling. After extensive testing, this modification is suitable for High grip tracks.*Note: This set does not fit with Xpress s..
Model: XP-10698
Description:Original replacement part for Execute FM1S XQ10F, keep spares ready so your race day won't cut short!..
Model: XP-10159
Description:
This is Execute Composite 1.1mm Piston Spacer Set, genuine official replacement part from Xpress...
Model: XP-10717
Description:Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under pressure and will not tweak!Note: Whilst ..
Model: XP-11181
Description:Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under pressure and will not tweak! Version 2 co..
Model: XP-10652
Description:
Genuine official replacement part from Xpress, official replacement part for the Execute XQ10**Note: If using this part with older type of anti-roll bars, you may need to purchase also the Set Screw 3x3mm #XP-40052 and 4.8mm Ball 10mm Thread #XP-10239...
Model: XP-10644
DescriptionGenuine replacement Execute XQ10 part, replace drivetrain parts when worn out to ensure a perfectly functioning car...
Model: XP-10822
Description:V2 of our rear uprights. We have further added more material to the hub for higher durability. Hard composite version resulting in higher corner speed but may take away some drivability.**Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer ..
Model: XP-10689
Description:V2 of our rear uprights. We have further added more material to the hub for higher durability.**Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension pins #XP-10602 and Hard Strong Front And Rear Composite Suspension Arms #XP-10597..
Model: XP-10163
Description:
This is Execute XQ1 Execute Composite Servo Horn Belt Tensioner Set, genuine official replacement part from Xpress...
Model: XP-10265
Description:
Genuine official replacement part from Xpress for XQ1S / XQ2S / XM1S. It also fits XQ1, XQ10F, XM1, FT1, FT1S, FM1S with Composite Spool 38T Set #XP-10264, which is the original parts of XQ10...
Model: XP-10671
Description:Titanium lightweight yet tough and durable spool outdrives for all forms of racing! Specially re-designed shape to make use of the full outdrive blade to get instantaneous power delivery! The lower weight increases the drive train efficiency. This out drive also fit the front plastic spo..
Model: XP-10921
Description:Titanium lightweight yet tough and durable spool outdrives for all forms of racing! Specially re-designed shape to make use of the full outdrive blade to get instantaneous power delivery! The lower weight increases the drive train efficiency. This out drive also fit the front plastic spo..
Model: XP-10739
Description:
Plastic Upper Deck Collar which allows you to control the flex on either end of your car.
This part is ready for use in XQ2S, XQ10F and FM1S out of box. If you are upgrading the XQ10, XQ1/ XQ1S, FT1 / FT1S, you need to use with the:
2.0mm Graphite Upper Deck For Flex Elimination For X..
Model: XP-10643
Description:
Plastic upper deck stiffener for tune the flex of the top deck stiffer but not too stiff when using the aluminum version!..
Model: XP-10611
Description:
Rebuild parts for the Double Jointed Universals that come with all of the Xpress XQ1 XQ1S FT1 FT1S XQ10 kits!..
Model: XP-10610
Description:
Rebuild parts for the Double Jointed Universals that come with Xpress XQ1 FT1 XQ10 XQ10F kits! ..
Model: XP-10613
Description:
Rebuild parts for the Double Jointed Universals for Xpress Execute Series Tourings.
**Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with 39mm Spring Steel Double Joint Universal ..
Model: XP-10128
Description:
This is Execute 3.0mm Driveshaft Protector Blade, genuine official replacement part from Xpress...
Model: XP-10876
Description:Replacement 4.0mm protector blades for use with XP-10921. The increased size of the blade increases durability...
Model: XP-10127
Description:
This is Execute Eccentric Bushing Set, genuine official replacement part from Xpress.
Note:
For install on XQ1S XQ2S XM1S FT1S FM1S DR1S series chassis, need to use together with the alloy / brass suspension mounts.
To run the most narrow track width in the front, you will require #X..
Model: XP-10107
Description:
This is Xpress Composite Ball Bearing Tension Adjustment Hub, genuine official replacement part from Xpress...
Model: XP-10109
Description:
This is Xpress Execute Composite Steering Block Pair For XQ1, XQ10, XQ10F, XQ1S, XQ2S, FT1, FT1S, genuine official replacement part from Xpress. Included are a set of left and right steering blocks..
Model: XP-10105
Description:
This is Xpress Execute Front Camberlink Mount for XQ1, XQ10, XQ10F, FT1, genuine official replacement part from Xpress...
Model: XP-10147
Description: This is Xpress Execute Shock Membrane, for shocks come with Execute XQ1, XQ10, XQ10F, XM1, FT1, XQ2S, DR1S. Fits most shock body in the market with 11mm inner diameter. Genuine official replacement part from Xpress...
Model: XP-10607
Description:Replacement o-ring for the spring adjust nut on the Xpress Execute XQ10 XQ10F XQ2S and DR1S..
Model: XP-10167
Description:
This is Xpress Execute Steel Universal Shaft 2pcs, genuine official replacement part from Xpress...
Model: XP-10813
Description:Gain more mechanical grip with this high flex chassis for use on low to medium tracks. Cut out slits around the motor mount area allowing more flex in the central area, combined with a different weave pattern greatly increases the flex of the graphite!..
Model: XP-10620
Description:Replacement steel center pulley post for the Execute XQ10...
Model: XP-10737
Description:FWD Conversion kit for the Xpress Execute XQ10, FWD drivetrain combined with a center of gravity shifted towards the center. By moving the pulley, the motor has been moved forwards as well putting more weight forwards and changing the weight balance by shifting one of the most heavy obje..
Model: XP-10833
Description:Shock towers for the Execute XQ10 XQ10F which features a deep cut on the top of the shock tower, allowing for more flex in the bulkhead areas. Which translates into more corner speed, you can also tune your car by using a normal shock tower in the opposing end of the car!..
Model: XP-10834
Description:Shock towers for the Execute XQ10 XQ10F which features a deep cut on the top of the shock tower, allowing for more flex in the bulkhead areas. Which translates into more corner speed, you can also tune your car by using a normal shock tower in the opposing end of the car!..
Model: XP-11050
Description:Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10559
Description:
Replacement part for the Execute XQ10 and XQ10F..
Model: XP-10009
Description:
This is Xpress Gear Differential Bevel Satellite Gears Set, genuine official replacement part from Xpress...
Model: XP-10008
Description:
This is Xpress Gear Differential Case and Cover, genuine official replacement part from Xpress...
Model: XP-10179
Description:
This is Xpress genuine official replacement part for Execute, Xpresso, GripXero Series..
Model: XP-10011
Description:This is Xpress Gear Differential Repair Parts for Execute, Xpresso, GripXero Series. Genuine official replacement part from Xpress...
Model: XP-10022
Description:
Replacement gear differential for Xpress's Execute XQ1 touring car. Injection molded composite gears with high precision ensure a smooth and long lasting gear differential! Aluminum outdrives with sleek black anodizing!..
Model: XP-10182
Description:
This is Xpress genuine official replacement part for Execute, Xpresso, GripXero Series. Spacers for the bevel gears..
Model: XP-10181
Description: This is Xpress genuine official replacement part for Execute, Xpresso, GripXero Series...