Newest Execute FWD touring car, the Xpress XQ10F, with modernized updates. Comes in a mid pulley configuration, split bulkheads. Several minor changes to the geometry, for a even more neutral handling car which makes it suitable for a more wider setup window.
Model: XP-10713
Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short!..
Model: XP-10733
Description:Optional Graphite Top deck for the Execute FM1S, giving you better performance at high temperature tracks!This is also the out of box front top deck for XQ10F...
Model: XP-10714
Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short!..
Model: XP-10602
Description:New 3.0mm outer suspension pins, to be used with the new "Strong" series of redesigned suspension arms for the Execute series!**Note: If use this part on XQ1 or XQ1S, need to use with Composite Suspension Parts Set Hard Strong #XP-10565 or Strong Composite Suspension Parts Set #XP-10606..
Model: XP-10139
Description:This is 3.0mm Suspension Pivot Pin for Execute series, genuine official replacement part from Xpress...
Model: XP-10334
Description:
Spring steel double jointed universals with a replaceable pin to exchange when worn out! Smoother cornering when compared to traditional single jointed universals!
Note: When using this part for upgrading the universal shaft from XQ1S, XQ2S, FT1S and DR1S, need to change the 5x10x4mm b..
Model: XP-11044
Description:Steel Double Joint Universal Shaft Pair for Execute Series Touring Chassis, genuine official replacement part from Xpress. With double joint universal shaft will greatly minimize the vibration of the outside front wheel in corners and improves the cornering speed and stability. These mea..
Model: XP-10716
Description:Original replacement part for the Execute XQ10F and XQ10 FWD conversion Kit, keep spares ready so your race day won't cut short!..
Model: XP-10151
Description:This is Xpress 4.8mm Ball 10mm Thread, 10pcs package, genuine official replacement part...
Model: XP-10239
Description:This is Xpress 4.8mm Ball 10mm Thread 4pcs, genuine official replacement parts for Xpress...
Model: XP-10148
Description:
This is Xpress 4.8mm Ball 5mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10236
Description:This is Xpress 4.8mm ball 5mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10149
Description:
This is Xpress 4.8mm Ball 6mm Thread, 10 pcs package, genuine official replacement part from Xpress...
Model: XP-10237
Description:This is Xpress 4.8mm Ball 6mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10150
Description:
This is Xpress 4.8mm Ball 8mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10251
Description:
This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10948
Description:This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle...
Model: XP-10121
Description:
This is 5.5mm Pivot Ball, genuine official replacement part from Xpress...
Model: XP-40086
Description:
Reduce the amount of free play you might get from bearing slop in your driveshafts with these shims. Applicable to the front or rear...
Model: XP-10811
Description:
Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..
Model: XP-10812
Description:
Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..
Model: XP-10650
Description:
Original replacement part for Execute XQ10 and XQ10F...
Model: XP-10123
Description:
This is Xpress Execute 2 Piece Suspension Mount Pair, genuine official replacement part from Xpress. These can be used either in the FR or RF position.Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S. DR1s and other sport series Execute Chassis replacing the original composite suspens..
Model: XP-10891
Description:
Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!..
Model: XP-10892
Description: Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!..
Model: XP-10745
Description:Adjust the distance between the two ballends on the steering bridge with this insert steering bridge system! What this achieves is different ackermann settings and adjusts how much steering angle difference you can achieve between the outside and inside tires when you turn. By using a la..
Model: XP-10192
Description:
Adjustable LiPo stoppers for easily securing LiPos of different lengths...
Model: XP-10889
Description:
Aluminium Anti-Roll Bar Bushing, genuine official replacement part from Xpress. Included are two pieces that can be inserted into the bulkhead or attaches to the end of the roll bar...
Model: XP-10935
Description:Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Also included are the new kingpin sets which are required for installing these C-Hubs..
Model: XP-10936
Description:Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Whilst also shortening the wheelbase which can be handy when running 0 arm sweep. Also included are the new kingpin sets which are required for installing these C-Hubs..
Model: XP-10111
Description:
Genuine official replacement part from Xpress, keep spares in your pitbag so your race day doesn't end early!..
Model: XP-10114
Description:
This is Xpress Execute Aluminium FF Lower One Piece Suspension Mount for XQ1 XQ10 XQ10F XQ1S XQ2S XM1 XM1S FT1 FT1S FM1S, genuine official replacement part from Xpress.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the original comp..
Model: XP-10637
Description:
Aluminum one piece FR suspension mount for all of the Execute Series Chassis, enlarged slot also allow the mount to use with the XQ1 Mid motor conversion kit!!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis for replacing the original comp..
Model: XP-10125
Description:
This is Xpress Execute and GripXero Aluminium Gear Diff Outdrive Adaptor 1 Pair, genuine official replacement part from Xpress...
Model: XP-10579
Description:
Replacement part for the Execute XQ10 XQ10F..
Model: XP-10494
Description:
This is an original replacement parts for XQ10, FT1 FT1S, also a direct upgrade parts of XQ2S and FM1S from composite steering post to aluminum post.It also compatible with older Execute chassis for upgrade or setting part. For XQ1 XQ1S XM1 XM1S, this lowered steering posts for install ..
Model: XP-10124
Description:
This is Xpress Execute RR Lower One Piece Suspension Mount, genuine official replacement part from Xpress.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 Eccen..
Model: XP-10727
Description:Original replacement for the XQ10F and a direct upgrade for Execute FM1S, giving you better rigidity and a more direct steering response...
Model: XP-10119
Description:
This is Aluminium 3x5.5x1.0mm Shim 20 pieces pack, genuine official replacement part from Xpress...
Model: XP-10580
Description:
Replacement part for the Execute XQ10 XQ10F..
Model: XP-10581
Description:
Replacement part for the Execute XQ10 XQ10F..
Model: XP-10578
Description:
Replacement part for the Execute XQ10 XQ10F Short Shock...
Model: XP-10651
Description:Aluminum Steering Plate For Dual Servo Saver For XQ10 XQ10F, genuine replacement part from Xpress...
Model: XP-10387
Description:
Bling bumper holder for Xpress series of cars! Offers more protection over the stock plastic part...
Model: XP-10683
Description:
Designed to be used with the Flex Eliminator Upper Deck, this set will allow you to limit longitudinal chassis flex whilst retaining lateral chassis flex. What this allows is corner grip but increasing forward traction! Use the aluminum collar if you wish to limit flex in all directions..
Model: XP-10129
Description:This is Xpress Aluminium 5mm Wheel Hub Red Pair, fits all shafts with 5mm axle. Genuine official replacement part from Xpress...
Model: XP-10365
Description:
Larger offset wheel adaptor in 6mm width for a large variety of cars!..
Model: XP-10176
Description:
This is Xpress genuine official replacement part for Execute Touring Series. Included are a set of front and rear rollbars...
Model: XP-10177
Description:
This is Xpress genuine official replacement part for Execute Touring Series. Included are a set of front and rear rollbars...
Model: XP-10178
Description:
This is Xpress genuine official replacement part for Execute Touring Series. Included are a set of front and rear rollbars...
Model: XP-10155
Description:
Full set of Anti-roll bars for the Execute XQ1, XQ10, XQ10F, FT1, ranges from 1.2 to 1.4 which should cover all required roll-bar dimensions for different tracks...
Model: XP-10731
Description:Upgrade Bando belts for the Xpress Execute FM1S and XQ10F, for higher efficiency in your drivetrain!..
Model: XP-10055
Description:
This is Xpress Body Clips 20pcs,genuine official replacement part from Xpress...
Model: XP-10819
Description:Body support braces to be used in conjunction with the new V2 Strong C Hubs, found on the Execute XQ2S, DR1S or even for upgrading your Execute series car!**Note: For Execute XQ1, XQ10, XQ10F, XM1, FT1, XQ1S, XM1S, FT1S, FM1S, need to use with V2 Strong Composite C Hub 4 Degree #XP-10400..
Model: XP-10198
Description:
Using these brass suspension pieces allows you to increase the weight without affecting the left to right balance! Direct replacement for the original two piece suspension mount.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing th..
Model: XP-10557
Description:
Control flex under the diff/spool area with this easy to install piece of graphite and brass. The brass piece also allows you to tune the weight bias of the car!..
Model: XP-10242
Description:
Brass made balancing weights which screw onto the chassis of the Execute Touring and secured in place with another locking pin...
Model: XP-10186
Description:
Brass made balancing weights which screw onto the chassis plate of the Execute series and secured in place with another locking pin...
Model: XP-10199
Description:
Using this brass suspension piece allows you to increase the weight without affecting the left to right balance!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 ..
Model: XP-10197
Description:
Adjust your chassis stiffness by changing to this optional one piece suspension mount for the rear of the front-end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected! Using this brass suspension piece allows y..