Newest Execute FWD touring car, the Xpress XQ10F, with modernized updates. Comes in a mid pulley configuration, split bulkheads. Several minor changes to the geometry, for a even more neutral handling car which makes it suitable for a more wider setup window.
Model: XP-10638
Description:
Brass one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well! Use for more stability on high traction tracks!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Exe..
Model: XP-10723
Description:
Put some weight in the front part of mid motor FWD chassis in order to reduce weight shift to the rear end during acceleration, to increase the power effectiveness and cornering speed. The 31g weight is lighter then the one comes with the kit, educe the weight on the front tires with th..
Model: XP-10196
Description:
Adjust your chassis stiffness by changing to this optional one piece suspension mount for the front of the rear end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected! Using this brass suspension piece allows y..
Model: XP-10200
Description:
Using this brass suspension piece allows you to increase the weight without affecting the left to right balance!Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 E..
Model: XP-10255
Description:This is Xpress Camber Stiffener Link Ball End for Execute Series, genuine official replacement part from Xpress...
Model: XP-10220
Description:
Camberlink stiffener for the Xpress Execute Series Tourings! By changing the link to a triangular link system, the c-hub is sitffened and provides predictable handling. After extensive testing, this modification is suitable for High grip tracks.*Note: This set does not fit with Xpress s..
Model: XP-10159
Description:
This is Execute Composite 1.1mm Piston Spacer Set, genuine official replacement part from Xpress...
Model: XP-10717
Description:Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under pressure and will not tweak!Note: Whilst ..
Model: XP-10652
Description:
Genuine official replacement part from Xpress, official replacement part for the Execute XQ10**Note: If using this part with older type of anti-roll bars, you may need to purchase also the Set Screw 3x3mm #XP-40052 and 4.8mm Ball 10mm Thread #XP-10239...
Model: XP-10644
DescriptionGenuine replacement Execute XQ10 part, replace drivetrain parts when worn out to ensure a perfectly functioning car...
Model: XP-10822
V2 of our rear uprights. We have further added more material to the hub for higher durability. Hard composite version resulting in higher corner speed but may take away some drivability.
**Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension ..
Model: XP-10689
Description:V2 of our rear uprights. We have further added more material to the hub for higher durability.**Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension pins #XP-10602 and Hard Strong Front And Rear Composite Suspension Arms #XP-10597..
Model: XP-10163
This is Execute XQ1 Execute Composite Servo Horn & Belt Tensioner Set, genuine official replacement part from Xpress...
Model: XP-10265
Description:
Genuine official replacement part from Xpress for XQ1S / XQ2S / XM1S. It also fits XQ1, XQ10F, XM1, FT1, FT1S, FM1S with Composite Spool 38T Set #XP-10264, which is the original parts of XQ10...
Model: XP-10739
Description:
Plastic Upper Deck Collar which allows you to control the flex on either end of your car.
This part is ready for use in XQ2S, XQ10F and FM1S out of box. If you are upgrading the XQ10, XQ1/ XQ1S, FT1 / FT1S, you need to use with the:
2.0mm Graphite Upper Deck For Flex Elimination For X..
Model: XP-10643
Description:
Plastic upper deck stiffener for tune the flex of the top deck stiffer but not too stiff when using the aluminum version!..
Model: XP-10610
Description:
Rebuild parts for the Double Jointed Universals that come with Xpress XQ1 FT1 XQ10 XQ10F kits! ..
Model: XP-10613
Description:
Rebuild parts for the Double Jointed Universals for Xpress Execute Series Tourings.
**Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with 39mm Spring Steel Double Joint Universal ..
Model: XP-10128
Description:
This is Execute 3.0mm Driveshaft Protector Blade, genuine official replacement part from Xpress...
Model: XP-10687
Description:
This is the motor of Xpress Execute FM1S and XQ10F, genuie replacement part from Xpress...
Model: XP-10107
Description:
This is Xpress Composite Ball Bearing Tension Adjustment Hub, genuine official replacement part from Xpress...
Model: XP-10109
This is Xpress Execute Composite Steering Block Pair For XQ1, XQ10, XQ10F, XQ1S, XQ2S, FT1, FT1S, genuine official replacement part from Xpress. Included are a set of left and right steering blocks..
Model: XP-10105
Description:
This is Xpress Execute Front Camberlink Mount for XQ1, XQ10, XQ10F, FT1, genuine official replacement part from Xpress...
Model: XP-10147
Description: This is Xpress Execute Shock Membrane, for shocks come with Execute XQ1, XQ10, XQ10F, XM1, FT1, XQ2S, DR1S. Fits most shock body in the market with 11mm inner diameter. Genuine official replacement part from Xpress...
Model: XP-10607
Replacement o-ring for the spring adjust nut on the Xpress Execute XQ10 XQ10F XQ2S and DR1S..
Model: XP-10833
Description:Shock towers for the Execute XQ10 XQ10F which features a deep cut on the top of the shock tower, allowing for more flex in the bulkhead areas. Which translates into more corner speed, you can also tune your car by using a normal shock tower in the opposing end of the car!..
Model: XP-10834
Description:Shock towers for the Execute XQ10 XQ10F which features a deep cut on the top of the shock tower, allowing for more flex in the bulkhead areas. Which translates into more corner speed, you can also tune your car by using a normal shock tower in the opposing end of the car!..
Model: XP-10830
Description:Replacement part for the Mid Mount FWD XQ2S conversion kit #XP-10829. It also fit with XQ10F but the servo mount plate out of box from XQ10F was made by carbon fiber...
Model: XP-11050
Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10722
Description:Put some weight in the front part of mid motor FWD chassis in order to reduce weight shift to the rear end during acceleration, to increase the power effectiveness and cornering speed...
Model: XP-10559
Description:
Replacement part for the Execute XQ10 and XQ10F..
Model: XP-10009
This is Xpress Gear Differential Bevel Satellite Gears Set, genuine official replacement part from Xpress...
Model: XP-10008
Description:
This is Xpress Gear Differential Case and Cover, genuine official replacement part from Xpress...
Model: XP-10179
Description:
This is Xpress genuine official replacement part for Execute, Xpresso, GripXero Series..
Model: XP-10011
This is Xpress Gear Differential Repair Parts for Execute, Xpresso, GripXero Series. Genuine official replacement part from Xpress...
Model: XP-10022
Description:
Replacement gear differential for Xpress's Execute XQ1 touring car. Injection molded composite gears with high precision ensure a smooth and long lasting gear differential! Aluminum outdrives with sleek black anodizing!..
Model: XP-10182
Description:
This is Xpress genuine official replacement part for Execute, Xpresso, GripXero Series. Spacers for the bevel gears..
Model: XP-10181
Description: This is Xpress genuine official replacement part for Execute, Xpresso, GripXero Series...
Model: XP-10715
Description:For some specific tracks that require less chassis flex, this one piece top deck on your FWD Converted XQ10 will allow more control and stability whilst cornering in both low and high speed corners! It fits with XQ10F as well...
Model: XP-10380
Description: Stiffens the body posts, which reduces the body from moving side to side, increases stability in the corners...
Model: XP-10222
Description:
Change to this graphite steering plate which offers a stiffer steering structure which in return gives you a sharper steering response and feeling! You will need to install a 2mm bumpsteer shim to get the same amount of bumper steer as the stock steering plate...
Model: XP-10243
Description:
Grahpite upper bumper holder for your Execute XQ1 XQ1S XQ2S XM1 XM1S FM1S XQ10 XQ10F DR1S..
Model: XP-10634
Description:
A new type of composite material, giving smoother action and prevents play for developing over a longer period of time! All plastics on the Execute XQ10 have been upgraded to this material! Keeping the flat shape design which allows you to run a taller camberlink position under the whee..
Model: XP-10635
A new type of composite material, giving smoother action and prevents play for developing over a longer period of time! All plastics on the Execute XQ10 have been upgraded to this material! Keeping the flat shape design which allows you to run a taller camberlink position under the wheel without rub..
Model: XP-10636
A new type of composite material, giving smoother action and prevents play for developing over a longer period of time! All plastics on the Execute XQ10 have been upgraded to this material! Keeping the flat shape design which allows you to run a taller camberlink position under the wheel without rub..
Model: XP-10684
Description:This is the replacement part for the suspension arm from the On-power Control System V2 #XP-10641. On-power Control System changes how your car behaves in the middle of the corner, adjust the angle with spacers to differ the toe-in change during suspension compression...
Model: XP-10957
Description:New and improved suspension arms. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more upright shock angle...
Model: XP-10810
Description:
Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set!..
Model: XP-10923
New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more upright shock angle...
Model: XP-10401
Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S DR1S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs!
Note: To use this new collar with other touring chassis in the Execute series, including XQ10, XQ10F, XQ1, XQ1S, FT1, and FT1S, you n..
Model: XP-10247
Harder suspension parts for use in medium to high grip conditions! This also allows for more efficient suspension with more grip generated as the arm flexes less when compared to the original plastics!..
Model: XP-10320
Description:
On high grip conditions, change to this steering plate which offers less ackermann which in turn provides more stability in the middle of the corner! Comes in a pack of four of two sets, marked with holes. The set with two holes give the least amount of ackermann, use this set to fine t..
Model: XP-10721
Description:Original replacement part for Execute FM1S and XQ10F, special cutting for installing the front brass balance to reduce weight shift to the rear when accelerate. ..
Model: XP-10725
Description:Replacement long travel shock bodies for the Execute XQ10 XQ10F. If use as replacement of the out of box short shock from the XQ10, the droop length with less downstop will be increase by approx. 1mm, while the overall length remain the same; yet with the same ride height and downstop se..
Model: XP-10724
Replacement plastic shock parts for the V2 long travel short shock set #XP-10593, this is a direct upgrade for the stock shocks from the XQ2S.
It can still fit with original kit short shock from XQ10 and FM1S, but the shock length will be decrease by 1mm, so it is recommended to use Long Travel Alum..
Model: XP-10593
Description:Updated short shock set for the Xpress Execute XQ10 and XQ10F, a structural redesign which eeks out more travel and ride height adjustment for the car! The increased travel inherently generates more traction for your chassis, so you will be able to notice a difference on low grip tracks!..
Model: XP-10863
Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis.
Note: The bumper parts in this item do not fit the FT1 / FT1S...
Model: XP-10562
Description:
The slim designed new foam bumper from the XQ10, this allows you to shift the weight towards another area for more steering! With the new style of high front downforce bodies, this bumper fits nicely with them. The three extruding tabs can be cut down if you choose to mount your body cl..
Model: XP-10726
Description:Further fine tune your roll centers with these easy to install spacer shims for your lower suspension mounts! Also included a shim for the one-piece optional FR mount!..
Model: XP-10169
Description:
This is Xpress Medium Spring Pair Silver for Execute XQ1 XQ10 XQ10F XM1 FT1 XQ2S DR1S. Genuine official replacement part from Xpress...