Newest Execute FWD touring car, the Xpress XQ10F, with modernized updates. Comes in a mid pulley configuration, split bulkheads. Several minor changes to the geometry, for a even more neutral handling car which makes it suitable for a more wider setup window.
Model: XP-10738
Description:Original replacement part for Execute FM1S and XQ10F, keep spares ready so your race day won't cut short!..
Model: XP-10685
Description:
This is the replacement part for the suspension arm from the On-power Control System V2 #XP-10641. On-power Control System changes how your car behaves in the middle of the corner, adjust the angle with spacers to differ the toe-in change during suspension compression.
Replacement Alumi..
Model: XP-10641
Description:
Change how your car behaves in the middle of the corner with the Xpress on-power Control System (XOC), adjust the angle with spacers to differ the toe-in change during suspension compression. Comes with special cut arms so you can adjust the wheelbase to be the same as if no XOC was use..
Model: XP-10718
Description:Progressive diameter shock bodies for the Execute XQ10 XQ10F or Long Travel V2 dampers! Featuring a more narrow opening at the top resulting in more resistance at the end of the travel. This will translate in a more aggressive car at turn in whilst more stability mid corner! Also can be ..
Model: XP-10131
Description:This is Xpress Rear Camberlink Mount Pair, for Execute XQ1 XQ10 XQ10F, genuine official replacement part from Xpress...
Model: XP-10560
Description:
Replacement part for the Execute XQ10 and XQ10F..
Model: XP-10191
Description:
Adjust your chassis stiffness by changing to this optional one piece suspension mount for the front of the rear end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected!
Note: When install on XQ1S, XQ2S, FT1S, XM..
Model: XP-10588
Description:Execute XQ10 XQ10F FT1 genuine official replacement part from Xpress...
Model: XP-10589
Description:
Execute XQ10 XQ10F FT1 genuine official replacement part from Xpress.
For rear right on FT1
For rear right and front left on XQ10 and XQ10F
When use as upgrade parts for FT1S, need to use with anti-roll bar assemble including:
#XP-10177 Anti-Roll Bar 1.3mm Front and Rear
#XP-10364 Ex..
Model: XP-10563
Description:
Replacement part for the Execute XQ10 XQ10F.
For rear left and front right on XQ10 and XQ10F..
Model: XP-10558
Description:
Replacement part for the Execute XQ10 XQ10F.
For rear right and front left on XQ10 and XQ10F..
Model: XP-10160
This is Xpress Shock O-Ring set, genuine official replacement part from Xpress...
Model: XP-10601
Description:
Redesigned X-Rings for smoother operation, with a revamped material choice which operates better in hot weather and last longer!..
Model: XP-10582
Description:Replacement shock shafts for the short shocks found on the Xpress Execute XQ10, XQ10F, XQ2S and DR1S..
Model: XP-10183
Description:This is Xpress genuine official replacement part for for Execute, Xpresso, GripXero Series..
Model: XP-10184
Description:This is Silicone Gear Differential O-RING 5x2mm 10pcs for Execute, Xpresso, GripXero Series, Xpress genuine official replacement parts...
Model: XP-10600
Softer, less contact path allows these X Rings to not generate as much drag on your diff cups when compared to traditional o-rings!..
Model: XP-10168
Description:
This is Xpress Soft Spring Pair for Execute XQ1 XQ10 XQ10F XM1 FT1 XQ2S. Genuine official replacement part from Xpress...
Model: XP-10688
Description:Original replacement part for Execute FM1S XQ10F, keep spares ready so your race day won't cut short!..
Model: XP-40071
Replacement Flat spot pins for the universals found on Execute.
Note: Please check your universal before you decide to purchase this item. This only fits with universals those with a 3x2mm set screw in the head of the universals at the differential / spool side...
Model: XP-10166
This is Steel Double Joint Universal Shaft Pair for Execute Series Touring Chassis, genuine official replacement part from Xpress. With double joint universal shaft will greatly minimize the vibration of the outside front wheel in corners and improves the cornering speed and stability.
Note: When u..
Model: XP-40240
Description:Steel shims for adjusting the gear mesh in your Arrow AT1 gearbox...
Model: XP-40198
Description:Genuine replacement part for Xpress series of cars...
Model: XP-10556
Description:
Replacement part for the Execute XQ10, also a direct upgrade parts for XQ1S XQ2S DR1S and XM1S
Note: Need to use with Composite Spool 38T Set (XP-10264) if install on XQ1 XM1 FT1 FT1S FM1S XQ10F..
Model: XP-10157
Description:
This is Xpress Steel Steering Turnbuckle Set for Execute series touring chassis, genuine official replacement part from Xpress...
Model: XP-10156
This is Xpress Execute Steel Turnbuckle 29mm Set, genuine official replacement part from Xpress...
Model: XP-10170
Description:
This is Xpress Stiff Spring Pair Pink for Execute XQ1 XQ10 XQ10F XM1 FT1 XQ2S DR1S. Genuine official replacement part from Xpress...
Model: XP-10604
Description:
New and improved suspension arms. These will be direct upgrade also on the Execute XQ1 series, during testing it was found that these suspension pieces gave more corner speed!
This C-hub also suitable for XQ2S, but will not compatible with the Body Support Brace #XP-10819. To use the B..
Model: XP-10605
Description:
New and improved suspension arms. These will be direct upgrade also on the Execute Touring series, during testing it was found that these suspension pieces gave more corner speed!**Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspen..
Model: XP-11006
New and improved suspension arms. These will be direct upgrade on the Xpress Touring series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more upright shock angle...
Model: XP-10400
Description:Updated C Hubs found on the Execute XQ2S, DR1S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the XP-10401 C Hub King Pin Set!..
Model: XP-10922
New and improved suspension arms. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more upright shock angle...
Model: XP-40202
Refresh package for use in Execute Universal Shafts, replace worn out parts with this pack...
Model: XP-10566
Description:
Direct upgrade part for Xpress Composite Upper Deck Stiffener from plastic composite to aluminum, further increase the stiffness of the upper deck, can be use as setting option for high grip tracks.Also a replacement part for the Mid Pulley Conversion kit for Execute XQ1 XQ1S #XP-10652...
Model: XP-10264
Description:Genuine official replacement part from Xpress for XQ1S / XQ2S / XM1S. It also fits XQ1, XQ10, XQ10F, XM1, FT1, FT1S, FM1S...