Menu
Your Cart

Car Parts

Replacement & Upgrade Parts for Xpress RC Cars, Execute, GripXero, Xpresso & Stix Series

Model: XP-10598
Description: New and improved suspension arms, in our hard material. These will be direct upgrade also on the Execute series, during testing it was found that these suspension pieces gave more corner speed! **Note: If you are upgrading the suspension arms for XQ1 or XQ1S, you will need to purchase t..
Model: XP-10684
Description:This is the replacement part for the suspension arm from the On-power Control System V2 #XP-10641. On-power Control System changes how your car behaves in the middle of the corner, adjust the angle with spacers to differ the toe-in change during suspension compression...
Model: XP-10599
Description: New and improved suspension arms, in our hard material. These will be direct upgrade also on the Execute XQ1 series, during testing it was found that these suspension pieces gave more corner speed! **Note: If you are upgrading the suspension arms for XQ1 or XQ1S, you will need to purcha..
Model: XP-10810
Description: Updated C Hubs found on the Execute XQ2S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the #XP-10401 C-hub king pin set!..
Model: XP-10597
Description: New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! **Note:If you are upgrading from the suspension arms of XQ1 or XQ1S, you will need to purchase the..
Model: XP-10018
Xpress Xpresso K1 2.0mm Graphite Upper Decks #XP-10018 Description:This is Xpress Xpresso K1 2.0mm Graphite Upper Deck, genuine official replacement part from Xpress...
Model: XP-10021
Xpress Xpresso K1 3.0mm Graphite Front Suspension Arm 1 pair #XP-10021 Description: This is Xpress Xpresso K1 3.0mm Graphite Front Suspension Arm, genuine official replacement part from Xpress...
Model: XP-10023
Xpress Xpresso K1 3.0mm Graphite Rear Suspension Arm 1 pair #XP-10023Description: This is Xpress Xpresso K1 3.0mm Graphite Rear Suspension Arm, genuine official replacement part from Xpress...
Model: XP-40025
Description: Racing bred body designed by "RCON Design" specifically for Xpress's K-1 K-Chassis! Low center of gravity will increase the speeds which you can corner at! Besides racing, this body has a rear specifically designed to make mounting normal 1/10 drift wings easy! K66 Body is Designed by ..
Model: XP-10496
Description: Replacement part for the: Mid Pulley Conversion kit for Execute XQ1 #XP-10625, Mid Pulley Conversion Kit for Execute XQ1S XQ2S #XP-10690, Execute XQ10. Can used in either the front or rear...
Model: XP-10392
Description: Spare front belt for the Xpress XM1 225mm wheelbase Conversion...
Model: XP-10484
Description: Replacement belt for the XM1 239mm wheelbase conversion...
Model: XP-10317
Description: Execute XM1 genuine official replacement part from Xpress...
Model: XP-10318
Description: Execute XM1 genuine official replacement part from Xpress...
Model: XP-10052
Description: This is Xpress Rear Belt 189t #XP-10052, genuine official replacement part from Xpress...
Model: XP-10645
Description:Bando branded belts for the Execute XQ1 XQ1S XQ2S series, made for longer lifespan but sacrificing some durability at the same time for use when using high powered motors!..
Model: XP-10647
Description: Low friction kevlar belts for most of the "mid" pulley touring cars on the market. Kevlar being strong and soft proves to be the best material for making belts!Note: This item is not compatible with the original XQ1 / XQ1S / XQ2S chassis, it should be use together with the #XP-10625 or ..
Model: XP-10646
Description: Bando branded belts for the Execute XQ1 XQ1S XQ2S, made for longer lifespan but sacrificing some durability at the same time for use when using high powered motors!..
Model: XP-10401
Description:Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs!Note: To use this new collar with other touring chassis in the Execute series, including XQ10, XQ10F, XQ1, XQ1S, FT1, and FT1S,..
Model: XP-10248
Description: Harder suspension parts for use in medium to high grip conditions! This also allows for more efficient suspension with more grip generated as the arm flexes less when compared to the original plastics!..
Model: XP-10247
Description: Harder suspension parts for use in medium to high grip conditions! This also allows for more efficient suspension with more grip generated as the arm flexes less when compared to the original plastics!..
Model: XP-10320
Description: On high grip conditions, change to this steering plate which offers less ackermann which in turn provides more stability in the middle of the corner! Comes in a pack of four of two sets, marked with holes. The set with two holes give the least amount of ackermann, use this set to fine t..
Model: XP-10721
Description:Original replacement part for Execute FM1S and XQ10F, special cutting for installing the front brass balance to reduce weight shift to the rear when accelerate.  ..
Model: XP-10725
Description:Replacement long travel shock bodies for the Execute XQ10F. It is also a direct upgrade for the XQ2S stock shock body.If use as replacement of the out of box short shock from the XQ10 and FM1S, the droop length with less downstop will be increase by appro. 1mm, while the overall length r..
Model: XP-10724
Description: Replacement plastic shock parts for the V2 long travel short shock set #XP-10593, this is a direct upgrade for the stock shocks from the XQ2S. It can still fit with original kit short shock from XQ10 and FM1S, but the shock length will be decrease by 1mm, so it is recommended to use Lo..
Model: XP-10593
Description:Updated short shock set for the Xpress Execute XQ10 and XQ10F, a structural redesign which eeks out more travel and ride height adjustment for the car! The increased travel inherently generates more traction for your chassis, so you will be able to notice a difference on low grip tracks!..
Model: XP-10561
Description: Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562.Note: The bumper parts in this item do not fit the FT1 / FT1S...
Model: XP-10562
Description: The slim designed new foam bumper from the XQ10, this allows you to shift the weight towards another area for more steering! With the new style of high front downforce bodies, this bumper fits nicely with them. The three extruding tabs can be cut down if you choose to mount your body cl..
Model: XP-10726
Description:Further fine tune your roll centers with these easy to install spacer shims for your lower suspension mounts! Also included a shim for the one-piece optional FR mount!..
Model: XP-10169
Description: This is Xpress Medium Spring Pair Silver for Execute XQ1 XQ10 XQ10F XM1 FT1 XQ2S. Genuine official replacement part from Xpress...
Model: XP-10549
Description: Replacement part for the XQ10 Touring chassis or Mid Motor Conversion kit for Execute XQ1! Rear stiffener allowing for different stiffness to be dialed into your chassis!..
Model: XP-10690
Description:Performance upgrade it for the Xpress Execute XQ1S, the pulley has been moved to the middle of the drivetrain. What this results in is equal length belts for both the front and rear, resulting in almost equal power delivery to both ends of the car allowing for earlier throttle exiting th..
Model: XP-10738
Description:Original replacement part for Execute FM1S and XQ10F, keep spares ready so your race day won't cut short!..
Model: XP-10091
Xpress Xpresso M1 2.0mm Graphite Chassis Plate #XP-10091 Description: This is Xpress 2.0mm Graphite Chassis For Xpresso M1, genuine official replacement part from Xpress...
Model: XP-10685
Description: This is the replacement part for the suspension arm from the On-power Control System V2 #XP-10641. On-power Control System changes how your car behaves in the middle of the corner, adjust the angle with spacers to differ the toe-in change during suspension compression. Replacement Alumi..
Model: XP-10641
Description:Change how your car behaves in the middle of the corner with the Xpress on-power Control System (XOC), adjust the angle with spacers to differ the toe-in change during suspension compression. Comes with special cut arms so you can adjust the wheelbase to be the same as if no XOC was used..
Model: XP-10718
Description:Progressive diameter shock bodies for the Execute XQ10 XQ10F or Long Travel V2 dampers! Featuring a more narrow opening at the top resulting in more resistance at the end of the travel. This will translate in a more aggressive car at turn in whilst more stability mid corner! Also can be ..
Model: XP-10131
Description:This is Xpress Rear Camberlink Mount Pair, for Execute XQ1 XQ10 XQ10F, genuine official replacement part from Xpress...
Model: XP-10560
Description: Replacement part for the Execute XQ10 and XQ10F..
Model: XP-10280
Description: Execute XM1S genuine official replacement part from Xpress...
Model: XP-10286
Description: Execute XQ1S genuine official replacement part from Xpress...
Model: XP-10014
Xpress Rear Upright For K1 M1 D1#XP-10014Description:This is Xpress Rear Upright, genuine official replacement part from Xpress...
Model: XP-10576
Description: Execute FT1/FT1S genuine official replacement part from Xpress...
Model: XP-10050
Xpress Replacement Shock Shaft Set 4pcs For Xpresso K1 M1 #XP-10050 Description: This is Xpress Replacement Shock Shaft Set, genuine official replacement part from Xpress...
Model: XP-10051
Xpress Replacement Silicone Parts Set For Xpresso K1 M1 #XP-10051 Description: This is Xpress Replacement Silicone Parts Set, genuine official replacement part from Xpress...
Model: XP-10191
Description: Adjust your chassis stiffness by changing to this optional one piece suspension mount for the front of the rear end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected! Note: When install on XQ1S, XQ2S, FT1S, XM..
Model: XP-10588
Description: Execute XQ10 XQ10F FT1 genuine official replacement part from Xpress.When use as upgrade parts for FT1S, need to use with anti-roll bar assemble including:#XP-10177 Anti-Roll Bar 1.3mm Front and Rear#XP-10364 Execute XQ1 Aluminum Anti-Roll Bar Bushing#XP-40060 Steering Rack Bearing 3x6x..
Model: XP-10589
Description: Execute XQ10 XQ10F FT1 genuine official replacement part from Xpress.When use as upgrade parts for FT1S, need to use with anti-roll bar assemble including:#XP-10177 Anti-Roll Bar 1.3mm Front and Rear#XP-10364 Execute XQ1 Aluminum Anti-Roll Bar Bushing#XP-40060 Steering Rack Bearing 3x6x..
Model: XP-10591
Description: Execute FT1 genuine official replacement part from Xpress. Also use as direct upgrade for FT1S...
Model: XP-10590
Description: Execute FT1 genuine official replacement part from Xpress. Also use as direct upgrade for FT1S...
Model: XP-10563
Description: Replacement part for the Execute XQ10 XQ10F...
Model: XP-10558
Description: Replacement part for the Execute XQ10 XQ10F...
Model: XP-10012
Xpress Servo Horn / Saver Set & Lower Damper Mount For K1 M1 D1#XP-10012 Description: This is Xpress Servo Horn / Saver Set & Lower Damper Mount, genuine official replacement part from Xpress...
Model: XP-10160
Description: This isXpress Shock O-Ring set, genuine official replacement part from Xpress...
Model: XP-10601
Description: Redesigned X-Rings for smoother operation, with a revamped material choice which operates better in hot weather and last longer!..
Showing 421 to 480 of 523 (9 Pages)
Privacy Notice
We use cookies to give you the best possible experience on our website. By continuing to browse this site, you give consent for cookies to be used. For more details please read our Privacy Policy.