Traditional touring cars are designed for use with 2s LiPo in line with a lot of the racing standards set by the racing organisations. But with the advancement in both LiPo and Brushless power systems technology, the DR1S was designed to handle power thrown at it much higher than the traditional 2s LiPo and 540 sized motors.
The DR1S was designed with the goal to handle all of that power. From Circuit racing to drag racing and 2s lipo to 6s lipo, the drivetrain was designed to deal with all of these high powered systems!
For Drag racing application, this car was designed to withstand the power which the current 1/8th power plants are able to generate. The height adjustable wheelie bar was designed to minimise launch times and stabilise the car after launch.
Model: XP-10909
Description:
Original replacement part for the Dragnalo DR1S, motor mount plate for mounting 1/8 sized motors...
Model: XP-10910
Description:
Original replacement part for the Dragnalo DR1S, FRP motor mount plate for 1/10 540 motors...
Model: XP-10907
Description:
Original replacement part for the Dragnalo DR1S...
Model: XP-10954
Description:Graphite motor plate for more rigid motor installation whilst keeping weight at a minimum...
Model: XP-10955
Description:Graphite motor plate for more rigid motor installation whilst keeping weight at a minimum...
Model: XP-10951
Description:Graphite bottom deck providing better flex characteristics compared to original fibre piece, also offering better consistency in hot conditions...
Model: XP-10952
Description:Graphite top deck providing better flex characteristics compared to original fibre piece, also offering better consistency in hot conditions...
Model: XP-10720
Description:
Original replacement servo holder plate for use in conjunction with the XP-10690 mid pulley conversion kit...
Model: XP-10937
Description:
Replacement rear shock tower for the Dragnalo DR1S. Note: If used on the XQ2S, the shock angles will be different...
Model: XP-10602
Description:New 3.0mm outer suspension pins, to be used with the new "Strong" series of redesigned suspension arms for the Execute series!**Note: If use this part on XQ1 or XQ1S, need to use with Composite Suspension Parts Set Hard Strong #XP-10565 or Strong Composite Suspension Parts Set #XP-10606..
Model: XP-10139
Description:This is 3.0mm Suspension Pivot Pin for Execute series, genuine official replacement part from Xpress...
Model: XP-10334
Description:
Spring steel double jointed universals with a replaceable pin to exchange when worn out! Smoother cornering when compared to traditional single jointed universals!
Note: When using this part for upgrading the universal shaft from XQ1S, XQ2S, FT1S and DR1S, need to change the 5x10x4mm b..
Model: XP-10239
Description:This is Xpress 4.8mm Ball 10mm Thread 4pcs, genuine official replacement parts for Xpress...
Model: XP-10148
Description:
This is Xpress 4.8mm Ball 5mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10236
Description:This is Xpress 4.8mm ball 5mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10149
Description:
This is Xpress 4.8mm Ball 6mm Thread, 10 pcs package, genuine official replacement part from Xpress...
Model: XP-10237
Description:This is Xpress 4.8mm Ball 6mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10150
Description:
This is Xpress 4.8mm Ball 8mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10682
Description:This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10948
Description:This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle...
Model: XP-10895
Description:This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle...
Model: XP-10121
Description:
This is 5.5mm Pivot Ball, genuine official replacement part from Xpress...
Model: XP-10123
Description:
This is Xpress Execute 2 Piece Suspension Mount Pair, genuine official replacement part from Xpress. These can be used either in the FR or RF position.Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S. DR1s and other sport series Execute Chassis replacing the original composite suspens..
Model: XP-10959
Description:Aluminum upgrade for Dragnalo DR1S's drivetrain pulley, this thin version drives the narrow front drive belt...
Model: XP-10912
Description:
Replacement motor mount for the Dragnalo DR1S, made from 7075 Aluminum for high durability...
Model: XP-10911
Description:
Original replacement part for the Dragnalo DR1S, center layshaft for mounting the spur and pulley...
Model: XP-10835
Description:Adjust the distance between the two ballends on the steering bridge with this insert steering bridge system! What this achieves is different ackermann settings and adjusts how much steering angle difference you can achieve between the outside and inside tires when you turn. By using a la..
Model: XP-10259
Description:
Execute XQ1S XQ2S XM1S FT1S FM1S DR1S genuine official replacement part from Xpress...
Model: XP-10111
Description:
Genuine official replacement part from Xpress, keep spares in your pitbag so your race day doesn't end early!..
Model: XP-10637
Description:
Aluminum one piece FR suspension mount for all of the Execute Series Chassis, enlarged slot also allow the mount to use with the XQ1 Mid motor conversion kit!!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis for replacing the original comp..
Model: XP-10104
Description:
This is Xpress Aluminum Front One Piece Upper Clamp For Execute Series, genuine official replacement part from Xpress...
Model: XP-10125
Description:
This is Xpress Execute and GripXero Aluminium Gear Diff Outdrive Adaptor 1 Pair, genuine official replacement part from Xpress...
Model: XP-10398
Description:Replacement part for the Short Shock Set found on the Xpress Sport series of cars...
Model: XP-10494
Description:
This is an original replacement parts for XQ10, FT1 FT1S, also a direct upgrade parts of XQ2S and FM1S from composite steering post to aluminum post.It also compatible with older Execute chassis for upgrade or setting part. For XQ1 XQ1S XM1 XM1S, this lowered steering posts for install ..
Model: XP-10956
Description:One piece Aluminum motor mount with integrated rear bulkhead, providing a very rigid connection between the the motor and rear diff. This allows the best power transfer towards the back, offering you great launch off the line!..
Model: XP-10115
Description:This is Xpress Execute Aluminium One Piece Lower Bulkhead, genuine official replacement part from Xpress for XQ1 and XM1, also a direct upgrade for the XQ1S XQ2S XM1S DR1S(Front only)...
Model: XP-10130
Xpress Aluminum Rear One Piece Upper Clamp For Execute XQ1 XQ1S XM1S XM1 XQ2S #XP-10130
Description:
This is Xpress Execute Aluminum Rear One Piece Upper Clamp, genuine official replacement part from Xpress...
Model: XP-10124
Description:
This is Xpress Execute RR Lower One Piece Suspension Mount, genuine official replacement part from Xpress.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 Eccen..
Model: XP-10136
Description:This is Execute Aluminium Servo Mount, genuine official replacement part from Xpress...
Model: XP-10119
Description:
This is Aluminium 3x5.5x1.0mm Shim 20 pieces pack, genuine official replacement part from Xpress...
Model: XP-10399
Description:
Replacement part for the Short Shock Set found on the Xpress Sport series of cars...
Model: XP-10397
Description:
Replacement part for the Short Shock Set found on the Xpress Sport series of cars...
Model: XP-10129
Description:This is Xpress Aluminium 5mm Wheel Hub Red Pair, fits all shafts with 5mm axle. Genuine official replacement part from Xpress...
Model: XP-10958
Description:Aluminum upgrade for Dragnalo DR1S's drivetrain pulley, this wide version drives the wide rear drive belt...
Model: XP-10396
Description:
Replacement shock parts for the Sports Short Shocks XP-10797 as well as on the Execute XQ2S DR1S ! Keep some spares or change out when your original parts develop slop from collisions on the track! Enough parts in one pack to rebuild four shocks!..
Model: XP-10055
Description:
This is Xpress Body Clips 20pcs,genuine official replacement part from Xpress...
Model: XP-10819
Description:Body support braces to be used in conjunction with the new V2 Strong C Hubs, found on the Execute XQ2S, DR1S or even for upgrading your Execute series car!**Note: For Execute XQ1, XQ10, XQ10F, XM1, FT1, XQ1S, XM1S, FT1S, FM1S, need to use with V2 Strong Composite C Hub 4 Degree #XP-10400..
Model: XP-10198
Description:
Using these brass suspension pieces allows you to increase the weight without affecting the left to right balance! Direct replacement for the original two piece suspension mount.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing th..
Model: XP-10199
Description:
Using this brass suspension piece allows you to increase the weight without affecting the left to right balance!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 ..
Model: XP-10638
Description:
Brass one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well! Use for more stability on high traction tracks!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Exe..
Model: XP-10927
Description:
Replacement 90g front lower brass piece for use with cars that feature the integrated bumper weight...
Model: XP-10200
Description:
Using this brass suspension piece allows you to increase the weight without affecting the left to right balance!Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 E..
Model: XP-10925
Description:
Optional 90g front upper brass piece for use with cars that feature the integrated bumper weight...
Model: XP-10255
Description:This is Xpress Camber Stiffener Link Ball End for Execute Series, genuine official replacement part from Xpress...
Model: XP-10159
Description:
This is Execute Composite 1.1mm Piston Spacer Set, genuine official replacement part from Xpress...
Model: XP-10920
Description:Spare diff case and center pulley for the Dragnalo DR1S. A very important drivetrain part to keep in your spares bag...
Model: XP-10934
Description:Replacement Composite spool set for the Dragnalo DR1S...
Model: XP-10717
Description:Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under pressure and will not tweak!Note: Whilst ..
Model: XP-11181
Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under pressure and will not tweak! Version 2 comes included..