Model: XP-10401
Replacement King pin for the new V2 Strong C-Hub found on the Execute XQ2S DR1S, be sure to keep a set in your parts bag or when you're upgrading from the old C Hubs!
Note: To use this new collar with other touring chassis in the Execute series, including XQ10, XQ10F, XQ1, XQ1S, FT1, and FT1S, you n..
Model: XP-30057
Description:LED lightup pitmat with a big selection of colors controlled through the control box up top. USB Type-C connection to power the lights...
Model: XP-10248
Description:
Harder suspension parts for use in medium to high grip conditions! This also allows for more efficient suspension with more grip generated as the arm flexes less when compared to the original plastics!..
Model: XP-10247
Harder suspension parts for use in medium to high grip conditions! This also allows for more efficient suspension with more grip generated as the arm flexes less when compared to the original plastics!..
Model: XP-10320
Description:
On high grip conditions, change to this steering plate which offers less ackermann which in turn provides more stability in the middle of the corner! Comes in a pack of four of two sets, marked with holes. The set with two holes give the least amount of ackermann, use this set to fine t..
Model: XP-10721
Description:Original replacement part for Execute FM1S and XQ10F, special cutting for installing the front brass balance to reduce weight shift to the rear when accelerate. ..
Model: XP-40279
Description:Own your own personalised Xpress tool set with your name engraved on the handle! This offer will only be available this one time, included is a sturdy carry case to protect your tools during transportation!Note: Maximum length is 10 Characters, limited to the English alphabet, numbers an..
Model: XP-40067
Description:Genuine replacement part for Xpress series of cars...
Model: XP-40068
Description:The same 7mm locknuts found in Xpress's car kits, have replacements handy for when you drop them!..
Model: XP-30044
Decorate your Touring Car body with this Xpress decal sheet! Comes with two types of borders for either dark or light color themed bodies! Included are Wing Endplate stickers for your usual 40x20mm touring car wings as well!..
Model: XP-30014
Description:
Decorate your Touring Car body with this Xpress decal sheet! Comes with two types of borders for either dark or light color themed bodies! Included are Wing Endplate stickers for your usual 40x20mm touring car wings as well!..
Model: XP-10725
Description:Replacement long travel shock bodies for the Execute XQ10 XQ10F. If use as replacement of the out of box short shock from the XQ10, the droop length with less downstop will be increase by approx. 1mm, while the overall length remain the same; yet with the same ride height and downstop se..
Model: XP-10724
Replacement plastic shock parts for the V2 long travel short shock set #XP-10593, this is a direct upgrade for the stock shocks from the XQ2S.
It can still fit with original kit short shock from XQ10 and FM1S, but the shock length will be decrease by 1mm, so it is recommended to use Long Travel Alum..
Model: XP-10593
Description:Updated short shock set for the Xpress Execute XQ10 and XQ10F, a structural redesign which eeks out more travel and ride height adjustment for the car! The increased travel inherently generates more traction for your chassis, so you will be able to notice a difference on low grip tracks!..
Model: XP-11125
Description:Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short! ..
Model: XP-11122
Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-11123
Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-11124
Description:Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short! ..
Model: XP-11128
Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-11129
Optional low friction ball pivot balls for use with Xpress shocks that use a 5.5mm size ball...
Model: XP-11126
Description:Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short! ..
Model: XP-11127
Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10863
Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis.
Note: The bumper parts in this item do not fit the FT1 / FT1S...
Model: XP-11058
Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short!..
Model: XP-10562
Description:
The slim designed new foam bumper from the XQ10, this allows you to shift the weight towards another area for more steering! With the new style of high front downforce bodies, this bumper fits nicely with them. The three extruding tabs can be cut down if you choose to mount your body cl..
Model: XP-10901
Description:Replacement parts for the Xpress Arrow AM1, genuine part for Xpress series of cars...
New
Model: XP-11301
Replacement inner parts for the shocks from the Execute XQ11RR, engraved number 1 and 3 on the pistons signifying which size the piston holes are. Note: will not fit other shocks from Xpress...
Model: XP-10726
Description:Further fine tune your roll centers with these easy to install spacer shims for your lower suspension mounts! Also included a shim for the one-piece optional FR mount!..
Model: XP-40154
Description:Distribute force evenly onto flat surfaces from your countersunk screws with these spacers...
Model: XP-10169
Description:
This is Xpress Medium Spring Pair Silver for Execute XQ1 XQ10 XQ10F XM1 FT1 XQ2S DR1S. Genuine official replacement part from Xpress...
Model: XP-10549
Description:
Replacement part for the XQ10 Touring chassis or Mid Motor Conversion kit for Execute XQ1! Rear stiffener allowing for different stiffness to be dialed into your chassis!..
Model: XP-10738
Description:Original replacement part for Execute FM1S and XQ10F, keep spares ready so your race day won't cut short!..
Model: XP-40234
Neatly store your tools with this Xpress logo tool bag! Fit either 8 hex wrenches or use the other side for other tools such as our shock wrench or scissors!..
Model: XP-40027
Description:
High grip M-Chassis Specific Drift tires from Xpress! Features clear color marking for easy identification of tire compound. Flat surface will allow the maximum contact patch with the surface during on and off throttle, comes in different hardness which makes using this on any surface s..
Model: XP-10986
Genuine Xpress replacement part, keep important spares in your pits box so your raceday or practice day isn't cut short! Made from nitrile butadiene rubber, prolonging membrane life!..
Model: XP-10091
Xpress Xpresso M1 2.0mm Graphite Chassis Plate #XP-10091
Description:
This is Xpress 2.0mm Graphite Chassis For Xpresso M1, genuine official replacement part from Xpress...
Model: XP-10267
Description:
This is Execute replacement On-power Control System 0 Deg Aluminium C-hub, genuine official replacement part from Xpress...
Model: XP-10268
Description:
This is Execute replacement On-power Control System Graphite Knuckle Plate, genuine official replacement part from Xpress...
Model: XP-10269
Description:
This is Execute replacement On-power Control System System Ball Stud Set, genuine official replacement part from Xpress...
Model: XP-10685
Description:
This is the replacement part for the suspension arm from the On-power Control System V2 #XP-10641. On-power Control System changes how your car behaves in the middle of the corner, adjust the angle with spacers to differ the toe-in change during suspension compression.
Replacement Alumi..
Model: XP-10641
Description:
Change how your car behaves in the middle of the corner with the Xpress on-power Control System (XOC), adjust the angle with spacers to differ the toe-in change during suspension compression. Comes with special cut arms so you can adjust the wheelbase to be the same as if no XOC was use..
Model: XP-11189
Replacement pivot insert for use on the Execute XQ11R graphite arms..
Model: XP-11159
Replacement ball joint set for use with the Execute XQ3S roll bar kit #XP-11203..
Model: XP-10998
Description:Replacement parts for the Xpress Arrow AT1S, genuine part for Xpress series of cars...
Model: XP-10848
Description:Miscellaneous plastic spare bits for your Arrow AT1, including battery stops and other small parts you would want to replace...
Model: XP-10881
Description:Replacement parts for the Xpress Arrow AT1S, genuine part for Xpress series of cars...
Model: XP-10880
Description:Replacement parts for the Xpress Arrow AM1S, genuine part for Xpress series of cars...
Model: XP-10718
Description:Progressive diameter shock bodies for the Execute XQ10 XQ10F or Long Travel V2 dampers! Featuring a more narrow opening at the top resulting in more resistance at the end of the travel. This will translate in a more aggressive car at turn in whilst more stability mid corner! Also can be ..
Model: XP-10704
Description:Replacement parts for the Xpress Arrow AT1, genuine part for Xpress series of cars...
Model: XP-10872
Description:Replacement parts for the Xpress Arrow AT1, genuine part for Xpress series of cars...
Model: XP-10991
Description:Get either your Execute XQ2S or XQ1S in race trim easily through this upgrade package, upgrading it with double jointed universals and roll bars!..
Model: XP-11193
Replacement steering rack and steering arm for the Arrow AT1SR rally car...
Model: XP-30045
Description:Show your support for Xpress by hanging one or more of this banner around your track! Material chosen to withstand the elements of the outdoors! Comes with rivet holes so that hanging this around your track will be easy...
Model: XP-30046
Description:Show your support for Xpress by hanging one or more of this banner around your track! Material chosen to withstand the elements of the outdoors! Comes with rivet holes so that hanging this around your track will be easy...
Model: XP-30022
Description:
Carry your car safely to and from the track with this Touring Car Carrying Box! Measuring in at 51.8 x 25 x 14.5 cm allowing you to fit some tires and spare rear wings in addition to the car!..
Model: XP-30007
Description:Show your support for Xpress by hanging one or more of this banner around your track! Material chosen to withstand the elements of the outdoors! Comes with rivet holes so that hanging this around your track will be easy...
Model: XP-30021
Description:Show your support for Xpress by hanging one or more of this banner around your track! Material chosen to withstand the elements of the outdoors! Comes with rivet holes so that hanging this around your track will be easy...
Model: XP-10131
Description:This is Xpress Rear Camberlink Mount Pair, for Execute XQ1 XQ10 XQ10F, genuine official replacement part from Xpress...
Model: XP-10993
Description:Replacement parts for the Xpress Arrow AT1, genuine part for Xpress series of cars. ..