
Our First Rally | Arrow AT1SR
The Arrow series takes the best from the Execute series of touring cars and incorporates it in a shaft driven system. Sporting floating gearboxes to include more chassis flex. Specially designed motor mount makes adjusting gear mesh a breeze. Also bringing various modern designs that brings this car fit for racing straight from the box, Sport version of the car whilst compromising in some material choices bringing the price down to a entry level whilst leaving you the option to upgrade where you see fit!
Get It Now !!!
Secure your's today so you don't miss out!【Dealer Location】
Video
Xpress 首架拉力車 | Arrow AT1SR 介紹 (cc中文字幕)
今次除左大師兄秋文和排骨仔 Eric 之外,仲有新車設計師 Wing Wing!有請大家介紹下 Arrow AT1SR 有咩新野!即刻去片!
Our First Rally | Arrow AT1SR Introduction
Sit down with Keith and let's see what's new in the Arrow AT1SR! Make sure to get your's at the local Xpress dealer!
Xpress Arrow AT1SR | In Action
Take a look at our first rally on the field.
Xpress Arrow AT1SR | Sneak Peak
Arrow AT1SR prototype join TITC 2025
For TITC, we got Keith to bring a prototype of our AT1 with the new rally bits installed for testing, this was his thoughts:
"Compared with the Execute XQ11R, the AT1SR with the long shocks and overall higher ride height performed very well in the jump underneath the driver's stand. The shaft driven powertrain also made for getting power down on the ramp much easier and led to more consistent jumps. However I chose the XQ11R as the amount of off-road sections were scarce so the choice was made to have less jump performance in exchange for better cornering across the track"
Arrow AT1SR Features
Updated Knuckle
Steering knuckles updated for the high rideheight used in rallying
Shock Tower
Redesigned to fit a longer damper
Front Arm
Redesigned to fit the higher chassis height.
Steering Rack
The steering rack is updated for off-road geometry.
Skidblocks
Front and rear protective plates effectively safeguard the frame, reducing damage caused by impacts.
Long Big Bore Shocks
Long big bore shocks for consistent off-road handling.
Chassis Cover
Lexan chassis cover to protect electronics from dust.
Specification
- Type: 1:10 On-road 4WD
- Length: 380mm
- Wheelbase: 258mm (Adjustable)
- Track Width: F186mm / R184mm (Approx.)
Required
- Radio system (transmitter and receiver)
- Steering servo
- Motor
- Pinion gear (64p)
- Battery pack
- Speed controller
- Charger
- Bodyshell
- Wheels, Tires, Inserts
Announcement
Our newest Arrow series's car are right around the corner! stepping out of the touring car category to create our first rally car, the Arrow AT1SR!
