Menu
Your Cart

Execute FT1

Xpress's 1/10 FWD touring car kit! Competition grade graphite decks throughout, with an inbuilt fan mount in the bumper! With the motor situated at the most forward position, thought was put into the battery placement selections which allows users to adjust the center of gravity through battery placement! Sharing the same differential as the XQ1, features high strength heavy duty gears ensures consistent and durable power delivery!

Belt driven transmission with an interal ratio of 1.9 removes the difficult of making the FDR associated with FF racing worldwide, being belt driving allows more tolerance against debris on the track when compared to a gear setup. Spring steel double jointed universals whilst allowing for smooth cornering ensures durability and allowing you to finish races without problems. The fast change brass weight attachments at the bottom of the bulkheads can act as a stiffener and adding weight without having to take the body off!

Model: XP-10129
Description:This is Xpress Aluminium 5mm Wheel Hub Red Pair, fits all shafts with 5mm axle. Genuine official replacement part from Xpress...
Model: XP-10640
Description: Aluminum bottom chassis for both Execute FT1, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity! Note: When use with Execute FT1S, need to install the Separated Bulkhead Typ..
Model: XP-10137
Description:This is Execute XQ1 Graphite Floating Servo Holder, genuine official replacement part from Xpress...
Model: XP-10602
Description:New 3.0mm outer suspension pins, to be used with the new "Strong" series of redesigned suspension arms for the Execute series!**Note: If use this part on XQ1 or XQ1S, need to use with Composite Suspension Parts Set Hard Strong #XP-10565 or Strong Composite Suspension Parts Set #XP-10606..
Model: XP-10139
Description:This is 3.0mm Suspension Pivot Pin for Execute series, genuine official replacement part from Xpress...
Model: XP-10334
Description: Spring steel double jointed universals with a replaceable pin to exchange when worn out! Smoother cornering when compared to traditional single jointed universals! Note: When using this part for upgrading the universal shaft from XQ1S, XQ2S and FT1S, need to change the 5x10x4mm ball be..
Model: XP-10151
Description:This is Xpress 4.8mm Ball 10mm Thread, 10pcs package, genuine official replacement part...
Model: XP-10239
Description:This is Xpress 4.8mm Ball 10mm Thread 4pcs, genuine official replacement parts for Xpress...
Model: XP-10148
Description: This is Xpress 4.8mm Ball 5mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10236
Description:This is Xpress 4.8mm ball 5mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10149
Description: This is Xpress 4.8mm Ball 6mm Thread, 10 pcs package, genuine official replacement part from Xpress...
Model: XP-10237
Description:This is Xpress 4.8mm Ball 6mm Thread, 4pcs package, genuine official replacement part...
Model: XP-10150
Description: This is Xpress 4.8mm Ball 8mm Thread, 10pcs package, genuine official replacement part from Xpress...
Model: XP-10253
Description: This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10252
Description: This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10251
Description: This is 4.8mm Low Profile Ball End, genuine official replacement part from Xpress...
Model: XP-10254
Description: A redesigned ball end set for replacing all the 4.8mm ball ends on the Execute XQ1 / XQ1S. Also compatible with other Execute Series Chassis...
Model: XP-10121
Description: This is 5.5mm Pivot Ball, genuine official replacement part from Xpress...
Model: XP-10811
Description: Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside! Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..
Model: XP-10812
Description: Get wider or narrower trackwidth for your Execute Series car! Either gain 0.75mm in either direction by installing the mount facing the offset towards inside the chassis or outside! Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the..
Model: XP-10123
Description: This is Xpress Execute 2 Piece Suspension Mount Pair, genuine official replacement part from Xpress. These can be used either in the FR or RF position.Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the original composite suspension mo..
Model: XP-10224
Description: Gain more mid corner control with this 5mm Ackermann Steering plate! By changing the angle of ackermann, you will notice better control-ability of the car during mid corner and acceleration out of the corner!..
Model: XP-10835
Description:Adjust the distance between the two ballends on the steering bridge with this insert steering bridge system! What this achieves is different ackermann settings and adjusts how much steering angle difference you can achieve between the outside and inside tires when you turn. By using a la..
Model: XP-10192
Description: Adjustable LiPo stoppers for easily securing LiPos of different lengths...
Model: XP-10889
Description: Aluminium Anti-Roll Bar Bushing, genuine official replacement part from Xpress. Included are two pieces that can be inserted into the bulkhead or attaches to the end of the roll bar...
Model: XP-10111
Description: Genuine official replacement part from Xpress, keep spares in your pitbag so your race day doesn't end early!..
Model: XP-10114
Description: This is Xpress Execute Aluminium FF Lower One Piece Suspension Mount for XQ1 XQ10 XQ10F XQ1S XQ2S XM1 XM1S FT1 FT1S FM1S, genuine official replacement part from Xpress. Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the original comp..
Model: XP-10637
Description: Aluminum one piece FR suspension mount for all of the Execute Series Chassis, enlarged slot also allow the mount to use with the XQ1 Mid motor conversion kit!! Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis for replacing the original composite ..
Model: XP-10423
Description: Execute FT1 genuine official replacement part from Xpress.When use as upgrade parts for FT1S, need to use with anti-roll bar assemble including:#XP-10177 Anti-Roll Bar 1.3mm Front and Rear#XP-10364 Execute XQ1 Aluminum Anti-Roll Bar Bushing#XP-40060 Steering Rack Bearing 3x6x2.5mm..
Model: XP-10424
Description: Execute FT1 genuine official replacement part from Xpress.When use as upgrade parts for FT1S, need to use with anti-roll bar assemble including:#XP-10177 Anti-Roll Bar 1.3mm Front and Rear#XP-10364 Execute XQ1 Aluminum Anti-Roll Bar Bushing#XP-40060 Steering Rack Bearing 3x6x2.5mm..
Model: XP-10570
Description: Execute FT1/FT1S genuine official replacement part from Xpress...
Model: XP-10425
Description: Execute FT1 / FT1S genuine official replacement part from Xpress...
Model: XP-10426
Description: Execute FT1/FT1S genuine official replacement part from Xpress...
Model: XP-10125
Description: This is Xpress Execute and GripXero Aluminium Gear Diff Outdrive Adaptor 1 Pair, genuine official replacement part from Xpress...
Model: XP-10145
Description: This is Execute XQ1 XM1 FT1 Aluminium Lower Shock Cap Pair, genuine official replacement part from Xpress...
Model: XP-10494
Description: This is an original replacement parts for XQ10, FT1 FT1S, also a direct upgrade parts of XQ2S and FM1S from composite steering post to aluminum post.It also compatible with older Execute chassis for upgrade or setting part. For XQ1 XQ1S XM1 XM1S, this lowered steering posts for install ..
Model: XP-10427
Description: Execute FT1/FT1S genuine official replacement part from Xpress...
Model: XP-10124
Description: This is Xpress Execute RR Lower One Piece Suspension Mount, genuine official replacement part from Xpress. Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 Eccentric B..
Model: XP-10136
Description:This is Execute XQ1 Aluminium Servo Mount, genuine official replacement part from Xpress...
Model: XP-10119
Description: This is Aluminium 3x5.5x1.0mm Shim 20 pieces pack, genuine official replacement part from Xpress...
Model: XP-10161
Description:This is Execute Aluminium Spring Tension Adjust Nut Pair, genuine official replacement part from Xpress...
Model: XP-10113
Description: This is Xpress Execute XQ1 XQ1S XQ2S FT1 FT1S FM1S Aluminium Steering Plate For Dual Servo Saver 4mm, genuine official replacement part from Xpress...
Model: XP-10683
Description: Designed to be used with the Flex Eliminator Upper Deck, this set will allow you to limit longitudinal chassis flex whilst retaining lateral chassis flex. What this allows is corner grip but increasing forward traction! Use the aluminum collar if you wish to limit flex in all directions..
Model: XP-10365
Description: Larger offset wheel adaptor in 6mm width for a large variety of cars!..
Model: XP-10654
Description:Hate tape? Use this free float battery mount for you Execute series of cars! By removing the need for battery tape, it removes the unwanted tweak generated when applied across the battery. Your choice of using the supplied tabs or velcro!..
Model: XP-10176
Description: This is Xpress genuine official replacement part for Execute Touring Series. Included are a set of front and rear rollbars...
Model: XP-10177
Description: This is Xpress genuine official replacement part for Execute Touring Series. Included are a set of front and rear rollbars...
Model: XP-10178
Description: This is Xpress genuine official replacement part for Execute Touring Series. Included are a set of front and rear rollbars...
Model: XP-10575
Description: Belts made from a kevlar material for the Execute FT1 series, made for longer lifespan but sacrificing some durability at the same time for use when using high powered motors!..
Model: XP-10005
Description: This is Xpress Battery Mount Set, genuine official replacement part from Xpress...
Model: XP-10055
Description: This is Xpress Body Clips 20pcs,genuine official replacement part from Xpress...
Model: XP-10819
Description:Body support braces to be used in conjunction with the new V2 Strong C Hubs, found on the Execute XQ2S or even for upgrading your Execute series car!**Note: For Execute XQ1, XQ10, XQ10F, XM1, FT1, XQ1S, XM1S, FT1S, FM1S, need to use with V2 Strong Composite C Hub 4 Degree #XP-10400 or Ha..
Model: XP-10198
Description: Using these brass suspension pieces allows you to increase the weight without affecting the left to right balance! Direct replacement for the original two piece suspension mount. Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the orig..
Model: XP-10242
Description: Brass made balancing weights which screw onto the chassis of the Execute Touring and secured in place with another locking pin...
Model: XP-10186
Description: Brass made balancing weights which screw onto the chassis plate of the Execute series and secured in place with another locking pin...
Model: XP-10199
Description: Using this brass suspension piece allows you to increase the weight without affecting the left to right balance! Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 Eccent..
Model: XP-10197
Description: Adjust your chassis stiffness by changing to this optional one piece suspension mount for the rear of the front-end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected! Using this brass suspension piece allows y..
Model: XP-10638
Description: Brass one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well! Use for more stability on high traction tracks! Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute C..
Model: XP-10432
Description: Genuine official option parts from Xpress Execute FT1 FT1S.Add more weight to the front of the chassis, to reduce weight shift to the rear part of the car, to increase the power efficiency and improve handling in mid of corner...
Model: XP-10196
Description: Adjust your chassis stiffness by changing to this optional one piece suspension mount for the front of the rear end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected! Using this brass suspension piece allows y..
Showing 1 to 60 of 155 (3 Pages)
Privacy Notice
We use cookies to give you the best possible experience on our website. By continuing to browse this site, you give consent for cookies to be used. For more details please read our Privacy Policy.