Replacement & Upgrade Parts for Xpress Execute XQ1S.
Different from other "entry" level priced touring car kits, the XQ1S features all the features of the XQ1 with adjustable suspension and steering to better prepare newcomers to the onroad touring car scene for the different type of setup changes you can make.
Fitted with oil-filled dampers and gear differential, setup can be adjusted towards either backyard bashing or even getting into club racing!
Model: XP-10724
Replacement plastic shock parts for the V2 long travel short shock set #XP-10593, this is a direct upgrade for the stock shocks from the XQ2S.
It can still fit with original kit short shock from XQ10 and FM1S, but the shock length will be decrease by 1mm, so it is recommended to use Long Travel Alum..
Model: XP-10863
Newly designed bumper pieces and body posts to be used with the low profile bumper foam XP-10562. Included are two bodypost mounts to rotate the rear mounting by 90 degrees, to mount the body posts parallel to the chassis.
Note: The bumper parts in this item do not fit the FT1 / FT1S...
Model: XP-10562
Description:
The slim designed new foam bumper from the XQ10, this allows you to shift the weight towards another area for more steering! With the new style of high front downforce bodies, this bumper fits nicely with them. The three extruding tabs can be cut down if you choose to mount your body cl..
Model: XP-10726
Description:Further fine tune your roll centers with these easy to install spacer shims for your lower suspension mounts! Also included a shim for the one-piece optional FR mount!..
Model: XP-10549
Description:
Replacement part for the XQ10 Touring chassis or Mid Motor Conversion kit for Execute XQ1! Rear stiffener allowing for different stiffness to be dialed into your chassis!..
Model: XP-10685
Description:
This is the replacement part for the suspension arm from the On-power Control System V2 #XP-10641. On-power Control System changes how your car behaves in the middle of the corner, adjust the angle with spacers to differ the toe-in change during suspension compression.
Replacement Alumi..
Model: XP-10641
Description:
Change how your car behaves in the middle of the corner with the Xpress on-power Control System (XOC), adjust the angle with spacers to differ the toe-in change during suspension compression. Comes with special cut arms so you can adjust the wheelbase to be the same as if no XOC was use..
Model: XP-10991
Description:Get either your Execute XQ2S or XQ1S in race trim easily through this upgrade package, upgrading it with double jointed universals and roll bars!..
Model: XP-10286
Description:
Execute XQ1S genuine official replacement part from Xpress...
Model: XP-10050
Description:
This is Xpress Replacement Shock Shaft Set, genuine official replacement part from Xpress. For use with long composite damper set...
Model: XP-10051
Description:This is Xpress Replacement Silicone Parts Set, genuine official replacement part from Xpress...
Model: XP-10191
Description:
Adjust your chassis stiffness by changing to this optional one piece suspension mount for the front of the rear end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected!
Note: When install on XQ1S, XQ2S, FT1S, XM..
Model: XP-40054
Description:Genuine replacement part for Xpress series of cars...
Model: XP-40056
Description:
Genuine replacement part for Xpress series of cars...
Model: XP-10160
This is Xpress Shock O-Ring set, genuine official replacement part from Xpress...
Model: XP-10601
Description:
Redesigned X-Rings for smoother operation, with a revamped material choice which operates better in hot weather and last longer!..
Model: XP-10183
Description:This is Xpress genuine official replacement part for for Execute, Xpresso, GripXero Series..
Model: XP-10184
Description:This is Silicone Gear Differential O-RING 5x2mm 10pcs for Execute, Xpresso, GripXero Series, Xpress genuine official replacement parts...
Model: XP-10600
Softer, less contact path allows these X Rings to not generate as much drag on your diff cups when compared to traditional o-rings!..
Model: XP-10053
Description:This is Xpress Replacement Spur Gear 64P 116T, genuine official replacement part from Xpress...
Model: XP-40071
Replacement Flat spot pins for the universals found on Execute.
Note: Please check your universal before you decide to purchase this item. This only fits with universals those with a 3x2mm set screw in the head of the universals at the differential / spool side...
Model: XP-10166
This is Steel Double Joint Universal Shaft Pair for Execute Series Touring Chassis, genuine official replacement part from Xpress. With double joint universal shaft will greatly minimize the vibration of the outside front wheel in corners and improves the cornering speed and stability.
Note: When u..
Model: XP-40069
Description:Genuine replacement part for Execute, Xpresso, GripXero Series of cars...
Model: XP-40198
Description:Genuine replacement part for Xpress series of cars...
Model: XP-10556
Replacement part for the Execute XQ10, also a direct upgrade parts for XQ1S XQ2S DR1S and XM1S
Note: Need to use with Composite Spool 38T Set (XP-10264) if install on XQ1 XM1 FT1 FT1S FM1S XQ10F..
Model: XP-10157
Description:
This is Xpress Steel Steering Turnbuckle Set for Execute series touring chassis, genuine official replacement part from Xpress...
Model: XP-10156
This is Xpress Execute Steel Turnbuckle 29mm Set, genuine official replacement part from Xpress...
Model: XP-10244
Execute XQ1S XQ2S FT1S DR1S genuine official replacement part from Xpress...
Model: XP-10604
Description:
New and improved suspension arms. These will be direct upgrade also on the Execute XQ1 series, during testing it was found that these suspension pieces gave more corner speed!
This C-hub also suitable for XQ2S, but will not compatible with the Body Support Brace #XP-10819. To use the B..
Model: XP-10605
Description:
New and improved suspension arms. These will be direct upgrade also on the Execute Touring series, during testing it was found that these suspension pieces gave more corner speed!**Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspen..
Model: XP-10400
Description:Updated C Hubs found on the Execute XQ2S, DR1S #XP-90032 and can also be used in other Execute Touring cars when used in conjunction with 3.0mm outer suspension pin arms and the XP-10401 C Hub King Pin Set!..
Model: XP-10922
New and improved suspension arms. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more upright shock angle...
Model: XP-10361
Description:
Replacement velcro strap for the Tweak Free Battery mount for Xpress's Execute Series! This Strap is used when the Tweak Free Battery Mount (#XP-10287) is installed in the Execute XQ1 or XQ1S!..
Model: XP-10566
Description:
Direct upgrade part for Xpress Composite Upper Deck Stiffener from plastic composite to aluminum, further increase the stiffness of the upper deck, can be use as setting option for high grip tracks.Also a replacement part for the Mid Pulley Conversion kit for Execute XQ1 XQ1S #XP-10652...
Model: XP-10165
This is Upright Pin Screw 2X3mm For Execute XQ1 XQ1S, genuine official replacement part from Xpress...
Model: XP-10321
Description:Achieve large amounts of forward traction whilst retaining cornering grip with this vertical top deck set! Adjust the lateral grip generated by your chassis by either adding or removing the center stiffener posts. The last part give you the option by linking the topdeck to the motor moun..
Model: XP-10264
Description:Genuine official replacement part from Xpress for XQ1S / XQ2S / XM1S. It also fits XQ1, XQ10, XQ10F, XM1, FT1, FT1S, FM1S...