Replacement & Upgrade Parts for Xpress Execute XQ1S.
Different from other "entry" level priced touring car kits, the XQ1S features all the features of the XQ1 with adjustable suspension and steering to better prepare newcomers to the onroad touring car scene for the different type of setup changes you can make.
Fitted with oil-filled dampers and gear differential, setup can be adjusted towards either backyard bashing or even getting into club racing!
Model: XP-10136
Description:This is Execute Aluminium Servo Mount, genuine official replacement part from Xpress...
Model: XP-10493
Description:
Replacement part for the Mid Motor Conversion kit for Execute XQ1...
Model: XP-10133
Description:This is Execute XQ1 Aluminium Solid Axle, genuine official replacement part from Xpress. If install on XQ1S / XQ2S / XM1S / XQ10, need to use with XP-10126 Steel Spool Outdrive Cup Adaptor..
Model: XP-10338
Description:
Replacement part for the Mid Pulley Conversion kit for Execute XQ1! This solid axle is specifically designed for the center drive belt pulley mounting...
Model: XP-10284
Description:
Execute XQ1S XQ2S genuine official replacement part from Xpress...
Model: XP-10258
Description:
Execute XQ1S XM1S FT1S FM1S genuine official replacement part from Xpress...
Model: XP-10113
Description:
This is Xpress Execute XQ1 XQ1S XQ2S FT1 FT1S FM1S Aluminium Steering Plate For Dual Servo Saver 4mm, genuine official replacement part from Xpress...
Model: XP-10387
Description:
Bling bumper holder for Xpress series of cars! Offers more protection over the stock plastic part...
Model: XP-10683
Description:
Designed to be used with the Flex Eliminator Upper Deck, this set will allow you to limit longitudinal chassis flex whilst retaining lateral chassis flex. What this allows is corner grip but increasing forward traction! Use the aluminum collar if you wish to limit flex in all directions..
Model: XP-10256
Description:
Execute XQ1S XM1S FT1S FM1S genuine official replacement part from Xpress...
Model: XP-10129
Description:This is Xpress Aluminium 5mm Wheel Hub Red Pair, fits all shafts with 5mm axle. Genuine official replacement part from Xpress...
Model: XP-10365
Description:
Larger offset wheel adaptor in 6mm width for a large variety of cars!..
Model: XP-20015
Narrow wheel hexes for easy trackwidth setup change! Fits modern touring cars which use the hex and locknut wheel mounting system. Laser engraving for you to easily see what width optional wheel hex it is...
Model: XP-10654
Description:Hate tape? Use this free float battery mount for you Execute series of cars! By removing the need for battery tape, it removes the unwanted tweak generated when applied across the battery. Your choice of using the supplied tabs or velcro!..
Model: XP-10327
Description:
Bushing set for installing optional rollbars onto your Execute XQ1S! Comes with all mounting hardware for installing this part...
Model: XP-10630
Bando branded belts for the Mid Motor 1/10 Touring Series of Execute Cars, made for longer lifespan but sacrificing some durability at the same time for use when using high powered motors!..
Model: XP-10055
This is Xpress Body Clips 20pcs,genuine official replacement part from Xpress...
Model: XP-10819
Body support braces to be used in conjunction with the new V2 Strong C Hubs, found on the Execute XQ2S, DR1S or even for upgrading your Execute series car!**Note: For Execute XQ1, XQ10, XQ10F, XM1, FT1, XQ1S, XM1S, FT1S, FM1S, need to use with V2 Strong Composite C Hub 4 Degree #XP-10400 or Hard Str..
Model: XP-10198
Description:
Using these brass suspension pieces allows you to increase the weight without affecting the left to right balance! Direct replacement for the original two piece suspension mount.
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing th..
Model: XP-10242
Description:
Brass made balancing weights which screw onto the chassis of the Execute Touring and secured in place with another locking pin...
Model: XP-10186
Description:
Brass made balancing weights which screw onto the chassis plate of the Execute series and secured in place with another locking pin...
Model: XP-10199
Description:
Using this brass suspension piece allows you to increase the weight without affecting the left to right balance!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 ..
Model: XP-10197
Description:
Adjust your chassis stiffness by changing to this optional one piece suspension mount for the rear of the front-end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected! Using this brass suspension piece allows y..
Model: XP-10638
Description:
Brass one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well! Use for more stability on high traction tracks!
Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Exe..
Model: XP-10196
Description:
Adjust your chassis stiffness by changing to this optional one piece suspension mount for the front of the rear end of your car! This suspension mount keeps the same width as the separate suspension pieces so the arm sweep angle isn't affected! Using this brass suspension piece allows y..
Model: XP-10200
Description:
Using this brass suspension piece allows you to increase the weight without affecting the left to right balance!Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S, DR1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with #XP-10127 E..
Model: XP-40037
Genuine replacement part for Xpress series of cars...
Model: XP-40038
Genuine replacement part for Xpress series of cars...
Model: XP-10164
Description:
This is C Hub King Pin Set for Execute Series, genuine official replacement part from Xpress...
Model: XP-10255
Description:This is Xpress Camber Stiffener Link Ball End for Execute Series, genuine official replacement part from Xpress...
Model: XP-10220
Description:
Camberlink stiffener for the Xpress Execute Series Tourings! By changing the link to a triangular link system, the c-hub is sitffened and provides predictable handling. After extensive testing, this modification is suitable for High grip tracks.*Note: This set does not fit with Xpress s..
Model: XP-10346
Description:
Replacement part for the Mid Motor Conversion kit for Execute XQ1...
Model: XP-10187
Description:
Sometimes you want to add weight to your car, but not wanting to mess up the left right balance. Use these central weights to add weight to the center of the chassis! Comes with both 15 and 25g for you to choose from!
*Note: This option is only suitable for XQ1, XQ1S, XQ2S, FT1 and FT1S..
Model: XP-10717
Description:Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under pressure and will not tweak!Note: Whilst ..
Model: XP-11181
Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without using tape, the chassis is not under pressure and will not tweak! Version 2 comes included..
Model: XP-10652
Description:
Genuine official replacement part from Xpress, official replacement part for the Execute XQ10**Note: If using this part with older type of anti-roll bars, you may need to purchase also the Set Screw 3x3mm #XP-40052 and 4.8mm Ball 10mm Thread #XP-10239...
Model: XP-10180
Description:
This is Xpress Composite Battery Stopper Set, genuine official replacement part from Xpress...
Model: XP-10270
Description:
This is Xpress Execute Composite Center Pulley 20T, genuine official replacement part from Xpress...
Model: XP-10231
Description:
Execute XQ1S XQ2S XM1S genuine official replacement part from Xpress...
Model: XP-10229
Description:
Execute XQ1S XQ2S XM1S FT1S FM1S genuine official replacement part from Xpress...
Model: XP-10822
V2 of our rear uprights. We have further added more material to the hub for higher durability. Hard composite version resulting in higher corner speed but may take away some drivability.
**Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension ..
Model: XP-10689
Description:V2 of our rear uprights. We have further added more material to the hub for higher durability.**Note: If you are upgrading the suspension of XQ1 or XQ1S, you also need to purchase the 3.0mm outer suspension pins #XP-10602 and Hard Strong Front And Rear Composite Suspension Arms #XP-10597..
Model: XP-10163
This is Execute XQ1 Execute Composite Servo Horn & Belt Tensioner Set, genuine official replacement part from Xpress...
Model: XP-10322
Description:
Execute XQ1S genuine official replacement part from Xpress...
Model: XP-10265
Description:
Genuine official replacement part from Xpress for XQ1S / XQ2S / XM1S. It also fits XQ1, XQ10F, XM1, FT1, FT1S, FM1S with Composite Spool 38T Set #XP-10264, which is the original parts of XQ10...
Model: XP-10671
Description:Titanium lightweight yet tough and durable spool outdrives for all forms of racing! Specially re-designed shape to make use of the full outdrive blade to get instantaneous power delivery! The lower weight increases the drive train efficiency. This out drive also fit the front plastic spo..
Model: XP-10921
Description:Titanium lightweight yet tough and durable spool outdrives for all forms of racing! Specially re-designed shape to make use of the full outdrive blade to get instantaneous power delivery! The lower weight increases the drive train efficiency. This out drive also fit the front plastic spo..
Model: XP-10740
Description:
Original replacement part for the Execute XQ1S, XQ2S, XM1S, FT1S FM1S and DR1S, keep spares ready so your race day won't cut short! **Note: The side servo mount does not fit on FM1S, please use FM1S Composite Side Servo Mount #XP-10741..
Model: XP-10260
Description:
Execute genuine official replacement part from Xpress...
Model: XP-10699
Replacement upper bulkhead set for the Execute XQ2S.
Comparing to older version of composite bulkhead from the other Execute Sport series chassis, the V2 bulkhead comes with one more hole for positioning the camber link, allows you to adjust the roll-center in another way. It also allows the adjustm..
Model: XP-10739
Description:
Plastic Upper Deck Collar which allows you to control the flex on either end of your car.
This part is ready for use in XQ2S, XQ10F and FM1S out of box. If you are upgrading the XQ10, XQ1/ XQ1S, FT1 / FT1S, you need to use with the:
2.0mm Graphite Upper Deck For Flex Elimination For X..
Model: XP-10262
Description: Execute XQ1S XQ2S XM1S FT1S FM1S genuine official replacement part from Xpress...
Model: XP-10016
This is Xpress Damper Part Replacement Set, genuine official replacement part from Xpress..
Model: XP-10611
Description:
Rebuild parts for the Double Jointed Universals that come with all of the Xpress XQ1 XQ1S FT1 FT1S XQ10 kits!..
Model: XP-10610
Description:
Rebuild parts for the Double Jointed Universals that come with Xpress XQ1 FT1 XQ10 XQ10F kits! ..
Model: XP-10612
Rebuild parts for the Double Jointed Universals that come with all of the Xpress XQ1 XQ1S FT1 FT1S XQ10 kits!..
Model: XP-10613
Rebuild parts for the Double Jointed Universals for Xpress Execute Series Tourings.
**Note: When install on XQ1S, XQ2S, FT1S, XM1S, FM1S and other sport series Execute Chassis replacing the original composite suspension mount, need to use with 39mm Spring Steel Double Joint Universal Shaft 2pcs #XP-..
Model: XP-10128
Description:
This is Execute 3.0mm Driveshaft Protector Blade, genuine official replacement part from Xpress...
Model: XP-10876
Replacement 4.0mm protector blades for use with XP-10921. The increased size of the blade increases durability...
Model: XP-10127
This is Execute Eccentric Bushing Set, genuine official replacement part from Xpress.
Note:
For install on XQ1S XQ2S XM1S FT1S FM1S DR1S series chassis, need to use together with the alloy / brass suspension mounts.
To run the most narrow track width in the front, you will require #XP-10334 39mm s..