Yugo and Yoshi travelled over to Singapore to race at this year's Electric Singapore International Challenge (ESIC) with our Execute XQ11! Let's take a look at how their race went!


【 2024.09.14 】ESIC 2024 Day 1

Unfortunately the day was cut short due to the rain and only two qualifying runs were held.


A high speed circuit usually home to noisy 1/8 Nitro cars.


Yugo & Yoshi's Execute XQ11. With how aggressive the Sweep control tires were, they opted to use an aluminum chassis to calm things down.


Both opted to use Twister bodies which have become a "control" body of sorts with how well it performs on track.

In

A banquet was held at the end of the day one and some of the international drivers were invited on stage.

【 2024.09.15 】ESIC 2024 Day 2: Finals

When all was said and done, Yugo finished 4th with Yoshi 8th!



Quick team photo of the two Japanese drivers flying the Xpress flag at the race.


Certificate of appreciation for supporting the ESIC was collected by Yugo.




Yoshi's Execute XQ11, running an aluminum chassis and using our camberlink stiffeners to fine tune caster and offering more rigidity for the high grip track.


Yugo's ride, running a similar setup to Yoshi. The two driver's exchanging setup tips and settling on a similar setup.




Yugo's fourth place trophy presentation.


Yosho's 8th place trophy presentation.




【 2024.09.13 】High Speed Layout Testing and Setup!

It is the second day of practice, Yugo and Yoshi are racing Xpress XQ11 at this year's ESIC with a high-speed layout!







Photos of Yugo's XQ11 with the graphite arms found on the XQ11HR!

Split topdecks, stiffener upper arms and aluminum chassis was Yugo's choice of upgrades for this race.


Fairly angled camberlinks.





Yoshi and Yugo arrived at Singapore for the ESIC, Electric Singapore International Challenge